Bosch Programme Table Installation And Operating Instructions Manual - Page 27

Browse online or download pdf Installation And Operating Instructions Manual for Washer Bosch Programme Table. Bosch Programme Table 32 pages. Front-loading washing machine
Also for Bosch Programme Table: Instruction Manual (10 pages), Operating Instructions Manual (8 pages), Instruction Manual (8 pages), Instruction Manual (8 pages), Instruction Manual (8 pages), Installation And Operating Instructions Manual (32 pages), Instruction Manual (10 pages), Instruction Manual (10 pages), Instruction Manual (8 pages), Instruction Manual (10 pages), Instruction Manual (8 pages), Instructions For Installation And Use Manual (8 pages), Instruction Manual (8 pages), Instruction Manual (8 pages), Operating Instructions Manual (10 pages), Operating Instructions Manual (10 pages), Operating, Care And Installation Instructions Manual (24 pages), Operating Instructions Manual (8 pages), Instructions For Use Manual (10 pages), Instruction Manual (10 pages), Operating Instructions Manual (8 pages), Instruction Manual (8 pages), Instruction Manual (10 pages), Instruction Manual (8 pages), Instruction Manual (8 pages), Instruction Manual (10 pages), Instruction Manual (8 pages), Instruction Manual (8 pages), Operating, Care And Installation Instructions Manual (24 pages), Operating And Installation Instructions (29 pages), Operating Instructions Manual (8 pages), Instruction Manual (10 pages), Instruction Manual (10 pages), Instruction Manual (8 pages)

Print Page
Bosch Programme Table Installation And Operating Instructions Manual

Water drainage

Drainage into a siphon

Electrical connection

Fitting the door hinges
to the washer-dryer
– Do not kink the drain hose or pull it lengthways.
– Height difference between the installation surface and the drain:
max. 90 cm, min. 50 cm.
Secure the connection with the 24-40 mm hose clamp (included with the
appliance).
The washer-dryer must only be connected to an alternating current supply
via a properly installed earthed socket.
If a residual current circuit breaker is used, only use a type which displays
this symbol: ‚.
Only this symbol guarantees compliance with the currently applicable
regulations.
The mains voltage must match the voltage specifications on the washer-
dryer (rating plate).
The connected load and fuse required are shown on the rating plate.
Make sure that:
– the mains plug fits the socket.
– the cable cross-section is adequate.
– the earthing system is properly installed.
– the appliance is not standing on the mains cable.
– the mains plug is accessible at all times.
Changes to the mains cable may only be carried out by an electrician.
Do not use multiple plugs/adapters or extension cables.
Do not plug in or unplug the mains plug with wet hands.
Only pull the mains plug out by the plug itself.
Once the washer-dryer has been installed in a kitchen unit, it can be
concealed with a door. If you wish to do this, you must fit the hinges
supplied to the washer-dryer.
27