Bosch WAE16166IL Series Instruction Manual And Installation Instructions - Page 31

Browse online or download pdf Instruction Manual And Installation Instructions for Washer Bosch WAE16166IL Series. Bosch WAE16166IL Series 36 pages.

Print Page

Hose and cable lengths

Left-hand connection

■

Right-hand connection

■

Tip:

The following are available from

specialist dealers/the after-sales

service:

Extension for Aqua-Stop and cold

■

water supply hose (approx. 2.50 m).

Order no. WMZ2380, WZ10130,

Z7070X0

A longer supply hose (approx. 2.20

■

m) for standard model

Positioning and connecting

Water inlet

Warning

Risk of death!

There is a risk of electric shock if you

touch live components.

Do not immerse the Aqua-Stop safety

valve in water (it contains an electric

valve).

Observe the following when connecting

the machine:

Notes

Only operate the washing machine

■

using cold mains water.

Do not connect the machine to the

■

mixer tap of an unpressurised hot-

water boiler.

Do not use a used supply hose. Only

■

use the supply hose supplied or one

that was purchased from an

authorised specialist retailer.

Do not bend, squash, modify or cut

■

through the water supply hose

(otherwise its strength is no longer

guaranteed).

Only tighten the screw connections

■

by hand. If the screw connections

are tightened too much with a tool

(pliers), the thread may be

damaged.

Optimum water pressure in the supply

network

At least 100 kPa (1 bar)

Maximum 1000 kPa (10 bar)

When the tap is open, the water flow is

at least 8 l/min.

If the water pressure is higher than this,

a pressure-reducing valve must be

installed.

Connection

Connect the water supply hose to the

water tap (¾" = 26.4 mm) and to the

appliance (not necessary for Aqua-Stop

models as this is permanently installed):