Bosch WAE22464AU Operating Instructions Manual - Page 8
Browse online or download pdf Operating Instructions Manual for Washer Bosch WAE22464AU. Bosch WAE22464AU 8 pages. Front load washing machine
Print Page
What to do if ...
Water is leaking out.
– Attach/replace the drainage hose correctly.
– Tighten the screw connection of the supply hose.
No water supply.
–
Start/Pause not selected?
Detergent not dispensed.
– Tap not turned on?
– Filter blocked? Clean the filter
– Supply hose kinked or trapped?
Washing machine door cannot
– Safety function active. Programme stopped?
be opened.
–
(without final spin) selected?
– Can be opened by emergency release only?
Programme does not start.
–
Start/Pause or
– Washing machine door closed?
– Childproof lock active? Deactivate
Detergent solution is not
–
(without final spin) selected?
drained.
– Clean the detergent solution pump
– Clean the waste pipe and/or drainage hose.
Water not visible in the drum.
– Not a fault - water below the visible area.
Unsatisfactory spin result.
– Not a fault - the unbalanced-load detection system has cancelled the spin cycle
Laundry wet/too damp.
because of uneven distribution of the laundry.
Distribute small and large items of laundry evenly inside the drum.
– Selected speed too low?
The programme duration
– Not a fault – the programme sequence is optimised for the particular wash
changes during the wash cycle.
process. This may result in changes to the programme duration in the display
field.
Spin cycle performed several
– Not a fault - unbalanced load detection system adjusts the imbalance.
times.
Residual water in the
– Not a fault - the action of the care product is not affected.
compartment for care
– Clean the insert if necessary
products.
Odour formation in the washing
– Run programme
machine.
Status display
(Wash)
– Too much detergent used? Mix 1 tablespoon of fabric softener with ½ litre of
flashes. Foam may be coming
water and pour into dispenser II (not for outdoor and down-filled textiles!).
out of the detergent drawer.
– Reduce the detergent dosage for the next wash cycle.
Intense noise formation,
– Are the appliance feet fixed?
vibrations and "wandering"
Secure the appliance feet
during the spin cycle.
– Transportation safety devices removed?
Remove the transportation safety devices
Noises during spin and drain
– Clean detergent-solution pump
cycles.
Display panel/indicator lamps
– Power cut?
do not function during
– Fuses triggered? Reset/change the fuse.
operation.
– If the fault occurs repeatedly, call customer services.
Programme sequence longer
– Not a fault - unbalanced load detection system adjusts imbalance by repeatedly
than usual.
distributing the laundry.
– Not a fault - foam detection system active - adds an additional rinse cycle.
Detergent residues on the
– Occasionally, phosphate-free detergents contain water-insoluble residues.
laundry.
– Use the
If you cannot correct a fault yourself (switching on/off) or a repair is required:
– Turn the programme selector to Off and remove the mains plug from the socket.
– Turn off the water supply and call customer services
page 10.
page 4.
page 3, 4.
page 9.
Ready in time selected?
page 5.
page 3, 4.
page 10.
page 5.
page 9.
Cottons 90 °C without laundry. Use standard detergent.
Installation instructions.
Installation instructions.
page 10.
Rinse/Freshen Up or brush out the laundry after washing.
Installation instructions.
Washing machine
WAE22464AU ...
en operating instructions
11