Bosch WAE24167GB Instruction Manual And Installation Instructions - Page 14
Browse online or download pdf Instruction Manual And Installation Instructions for Washer Bosch WAE24167GB. Bosch WAE24167GB 32 pages.
Print Page
Operating the appliance
en
areas with very soft water or for further
enhancing the rinsing result.
O Rinse Plus
(à Extra Rinse, Rinse Plus)
Additional rinse cycle. For areas with
very soft water or for further enhancing
the rinsing result.
1
Operating the
appliance
Correctly install and connect
Note:
O p e r a t i n g t h e a p p l i a n c e
the washing machine. From
~ Page 25
Before the first wash, run a wash
without any laundry. ~ Page 31
Preparing the washing
machine
Notes
Never switch on a damaged washing
■
machine.
Inform the after-sales service.
■
~ Page 24
Connect the mains plug.
1.
Turn on the tap.
2.
Open the washing machine door.
3.
Check that the drum is completely
4.
drained. Drain if necessary.
14
Select programme/switch on
the appliance
Use the programme selector to select
the required programme. Can be
rotated in both directions.
The machine is switched on.
Change the programme
default settings
You can use the displayed programme
default settings or adjust them.
To do this, repeatedly press the
corresponding button until the required
setting is displayed. Then press the
Start button to start the programme.
All buttons are sensitive and only
Note:
need to be touched lightly. If the buttons
are held for longer, the appliance
automatically runs through the setting
options.
The settings are activated without
needing to be confirmed.
They are not saved after the appliance
is switched off.
Programme default settings ~ Page 13
Programme overview from ~
Supplementary sheet for the installation
and operating instructions
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
The settings can be selected or
deselected depending on the progress
of the programme.
The button indicator lamps light up if a
setting is activated.
The settings are not saved when the
appliance is switched off.