BCN3D Epsilon Series Quick Start Manual

Browse online or download pdf Quick Start Manual for 3D Printers BCN3D Epsilon Series. BCN3D Epsilon Series 2 pages.
Also for BCN3D Epsilon Series: Quick Start Manual (2 pages), Quick Start Manual (2 pages)

Print Page
BCN3D Epsilon Series Quick Start Manual
Quick Start Guide in your
own language
User Guide
For more detailed
information about the
processes, read the User
Manual.
Unboxing video
Unboxing
Watch our video to see
how to correctly unbox.
Set up video
Install printing surface
Watch our video to see
how to correctly position
the build plate.
Quick Start Guide
BCN3D Epsilon Series
We would like to thank all users for trusting BCN3D, for helping us to reach our
dreams and to create a better product every day.
1. Unboxing
The printer is heavy and therefore this step needs to be performed by two people. Make sure
that the table where the printer is being installed, is close enough.
Retain packaging and pallet for warranty service.
1. Cut the straps and
remove the top box
and the plastic bag
containing the printer.
2. Set up
Remove protections
•
Remove the blue sticker from the door to open it.
•
Remove the protective foam under the platform.
•
Remove the belt clips that prevent the axes from moving during transportation.
There are four in total: two in the X belts (in front) and two in the Y belts
(one on the left and one on the right).
•
Finally, remove the protective films from the covers, door and side panels.
Install build plate
•
Pivot the left and right spring clips away from the aluminium plate.
•
Take the glass build plate from the bottom tray.
•
Place the build plate on top of the aluminium plate.
•
Insert the build plate with light force into the back spring clips.
•
Fix it with the left and right spring clips.
1
The glass build plate must be handled with care. In case of breakage, it may cause injuries.
Specifications subject to change. EN-MES-2021-v1.2
Use the handles to take
out the printer
2. Lean the printer
backwards holding it
from both side handles
and the front-bottom.
2
3
3. Lift with care and place it
on the table.
4