Bosch WAE24461GB Instruction Manual And Installation Instructions - Page 38

Browse online or download pdf Instruction Manual And Installation Instructions for Washer Bosch WAE24461GB. Bosch WAE24461GB 40 pages. Bosch wae24461gb washing machine
Also for Bosch WAE24461GB: Instruction Manual And Installation Instructions (40 pages)

Bosch WAE24461GB Instruction Manual And Installation Instructions
Positioning and connecting
en

Levelling

Level the appliance using a spirit level.
Incorrect levelling may result in intense
noise, vibrations and "wandering".
Loosen the lock nuts using a
1.
spanner, by turning it in a clockwise
direction.
Check the levelling of the washing
2.
machine with a spirit level, and
adjust it if necessary. Change the
height by turning the appliance feet.
All four appliance feet must stand
firmly on the ground.
Tighten the lock nut against the
3.
housing.
In doing so, hold the foot tight and
do not adjust its height.
The lock nuts on all four appliance
feet must be screwed tightly against
the housing.

Electrical connection

:
Warning
Risk of death!
There is a risk of electric shock if you
touch live components.
Never touch or hold the mains plug
with wet hands.
Only pull out the mains cable by the
plug and never by the cable, as this
could damage it.
Never unplug the mains plug during
operation.
Observe the following information and
ensure that:
38
Notes
The mains voltage and voltage
indicated on the washing machine
(rating plate) are the same.
The connected load and fuse
required are specified on the rating
plate.
The washing machine is only
connected to an alternating current
via a properly installed earthed
socket.
The mains plug fits the socket.
The cable cross-section is adequate.
The earthing system is properly
installed.
The mains cable is only replaced by
a qualified electrician (if this is
necessary). Replacement mains
cables are available from the after-
sales service.
No multiple plugs/couplings or
extension cables are used.
If an earth-leakage circuit breaker is
used, only a type which displays this
symbol z is used.
Only this symbol guarantees
compliance with the currently
applicable regulations.
The mains plug can be accessed at
all times.
The mains cable is not bent,
squashed, modified, cut through, or
in contact with heat sources.