Draper 15225 Instructions Manual - Page 10

Browse online or download pdf Instructions Manual for Power Tool Draper 15225. Draper 15225 16 pages. 2000w 230v hot air gun
Also for Draper 15225: User Manual (16 pages)

Print Page

BASIC HOT AIR GUN OPERATIONS

NOTE: Remove the plug from the socket before carrying

out adjustment, servicing or maintenance.

IMPORTANT: Ensure that the machine is switched OFF

before connecting to the power supply.

8.1 ON/OFF SWITCH - FIG.1

FIG.1

The ON/OFF switch

has four positions/settings.

Position 0 is off.

Position 1 is "cool heat" which is a steady 50°C heat

(approx.) at 500 L/min

Position 2 is heat approximately 450°C (approx.)

at 250L/min.

Position 3 is heat approximately 600°C (approx.)

at 500L/min.

8.2 FREESTANDING OPERATION - FIG.2

FIG.2

This hot air gun can be positioned freestanding. This

allows the user to have both hands free which is

essential for certain applications, e.g. pipe bending,

plastic welding, etc. Position the hot air gun on it's end,

only on a level suitable surface.

NOTE: Never leave the hot air gun unattended or

switched on.

The following instructions on next page should only be

used as a guide as the ideal temperature should be

ascertained by performing a test on the workpiece.

Heating efficiency will vary depending on the properties

of the workpiece, and the distance kept between the

metal nozzle and the workpiece itself.

IMPORTANT: THERMAL OVERLOAD PROTECTION:

Please note this machine is fitted with a safety thermal

overload protection. If the product is continuously used

too close to the workpiece resulting in over heating and

the machine potentially catching fire, the thermal

overload protection will be activated and stop the

machine. This feature will reset once temperature has

fallen (approx 2mins).

NOTE: The heat gun fan continues to run when the

thermal overload protection is activated, this draws cool

air through the heat gun to cool it down as quickly as

possible.

WARNING: Remember the nozzle will remain hot for

sometime - a safe storage location should be used.