Draper 17768 Instructions Manual - Page 10
Browse online or download pdf Instructions Manual for Power Tool Draper 17768. Draper 17768 20 pages. 1600w 115v 15kg
Print Page
8.
PREPARING THE BREAKER
NOTE: Before you connect the equipment to the mains
supply make sure that the data on the rating plate are
identical to the mains data.
Remove the plug from the socket before carrying out
adjustment, servicing or maintenance.
8.1 AUXILIARY HANDLE - FIGS. 1 - 2
The auxiliary handle
stability whilst using the breaker.
For safety reasons the machine must not be used
without the auxiliary handle
The auxiliary handle can be turned into any required
position. Unlock knob
most comfortable working position, then re-tighten.
WARNING: Always hold the machine only by the two
handles. This is to avoid electric shock if the chisel hits
live cables.
8.2 INSERTING THE TOOL - FIG. 3
• Clean the tool before fitting it and apply a thin
coating of grease to the tool shaft.
• Pull out the locking bolt
through 180° and release it.
• Insert the tool into the tool mounting
in as far as possible.
• Pull out the locking bolt
180° and release it.
• Check the lock by pulling the tool.
Removing the tool
• To remove the tool, proceed in reverse order.
10
enables you to achieve better
.
and turn the handle into the
as far as possible, turn it
again, turn it through
FIG.1
FIG.2
FIG.3
and push it