Draper 65027 Instructions Manual - Page 4
Browse online or download pdf Instructions Manual for Power Tool Draper 65027. Draper 65027 12 pages. 110v/230v router
Print Page
CONNECTING YOUR MACHINE TO THE POWER SUPPLY: (240V)
To eliminate the possibility of an electric shock your machine has been fitted with a BS approved,
non rewireable moulded plug and cable which incorporates a fuse, the value of which is indicated
on the pin face of the plug. Should the fuse need to be replaced an
must be used of the same rating, marked thus
plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour
as that visible on the pin face of the plug (i.e. red). Fuse covers are available from your Draper Tools
stockist.
If the fitted plug is not suitable, it should be cut off and destroyed. *The end of the cable should now
be suitably prepared and the correct type of plug fitted. See below.
*WARNING:
A plug with bare flexible wires exposed is hazardous if engaged in a live power socket outlet.
WARNING: THIS APPLIANCE IS DOUBLE INSULATED.
Blue – Neutral, Brown – Live.
As these colours may not correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal which is marked with the letter
'N' or coloured black or blue.
The wire which is coloured brown must be connected to the terminal which is marked with the
letter 'L' or coloured red or brown.
CONNECTING YOUR MACHINE TO THE POWER SUPPLY (110V)
To eliminate the possibility of an electric shock your machine has been fitted with a BS approved,
rewireable plug and cable. If the fitted plug is not suitable, it should be removed, the end of the
cable should be suitably prepared and the correct type of plug fitted. See below.
WARNING: THIS APPLIANCE IS DOUBLE INSULATED.
Single phase 110 volt machines must be connected using the relevant coding and matching the
colour of the flexible cable to that of the plug. The procedure is as follows:
1. Connect brown coloured core to plug terminal marked letter 'L' (live).
2. Connect blue colour core to plug terminal marked letter 'N' (neutral).
POWER SUPPLY
WIRING DIAGRAM
.The fuse cover is detachable, never use the
R1900V
- 3-
approved BS1362 fuse