Draper BR15A Instructions Manual - Page 13

Browse online or download pdf Instructions Manual for Power Tool Draper BR15A. Draper BR15A 20 pages. 1600w 115v 15kg

Print Page

10. MAINTENANCE

Always pull out the mains power plug before

starting any cleaning work.

• Keep all safety devices, air vents and the motor

housing free of dirt and dust as far as possible.

Wipe the equipment with a clean cloth or blow it with

compressed air at low pressure.

• We recommend that you clean the device immediately

each time you have finished using it.

• Clean the equipment regularly with a moist cloth and

some soft soap. Do not use cleaning agents or

solvents; these could attack the plastic parts of the

equipment. Ensure that no water can seep into the

device.

• In case of excessive sparking, have the carbon brushes

checked only by a qualified electrician.

Important: The carbon brushes should not be replaced

by anyone but a qualified electrician.

10.3 CHECK THE OIL LEVEL - FIG. 6

Check the oil level before using the machine.

Place the machine on the floor with the tool

mounting pointing downwards. The oil must be at

least 3 mm above the bottom edge of the inspection

window

Changing the oil: The oil should be changed after

around 40-50 hours of use.

Recommended oil: 25ml SAE 15W/40 or an

alternative of the same quality.

FIG.6