Draper CIW12VD Original Instructions Manual - Page 13
Browse online or download pdf Original Instructions Manual for Power Tool Draper CIW12VD. Draper CIW12VD 20 pages.
Print Page
8.
BASIC IMPACT WRENCH OPERATIONS
8.1 INSTALLING AND REMOVING
SOCKETS
This wrench is supplied with a 3/8" Square Drive.
Note: This product is equipped with an electric
brake. Never use any sockets or accessories that
are not hardened for impact use.
Never use standard chrome vanadium steel
sockets which can shatter and can cause
personal injury.
To fit a socket:
–
Push fit the socket over the anvil. The friction
based ring holds the socket securely in place.
To remove a socket:
–
Pull the socket away from the anvil to remove.
Note: Extra effort may be required when fitting and
removing brand new sockets on their initial usage.
8.2 ROTATIONAL DRIVE SELECTION –
FIGS. 1 – 2
The forward/reverse drive selector switch (6)
determines the direction of rotation of the drive,
i.e. clockwise or anticlockwise.
To alter the direction of rotation:
–
Stop the machine and push switch to the left
or right.
–
When the direction switch is pushed to the left,
the drive will rotate clockwise.
–
When the switch is pushed to the right, the
drive will rotate anticlockwise.
–
Before operation, check that the switch is set
in the required position. Do not change the
direction of rotation until the wrench comes to
a complete stop.
–
When the wrench is not in use move the
direction switch to the neutral position
(the middle setting) to lock the trigger out.
Note: Failure to use the neutral position
may activate the trigger inadvertently.
This inadvertent operation may cause the
wrench to become damaged.
(6)
FIG. 1
FIG. 2
– 13 –