Draper 36761 Instructions Manual - Page 13
Browse online or download pdf Instructions Manual for Saw Draper 36761. Draper 36761 20 pages. 360mm bandsaw
Print Page
- 1. General Information
- 2. Table of Contents
- 3. Contents/Declaration
- 4. Specification/Guarantee
- 5. Power Supply
- 6. General Safety Instructions
- 7. Additional Safety Rules
- 8. Unpacking and Checking Contents
- 9. Getting to Know Your Bandsaw
- 10. Assembly
- 11. Operation and Use
- 12. Operation and Use
- 13. Tips on Using Your Bandsaw
- 14. Tips on Using Your Bandsaw
- 15. Maintenance/Optional Accessories
OPERATION & USE
Remove the saw blade as explained in
CHANGING BLADES (page11).
Remove the sanding disc guard from the
front cover. Mount the support rod
of
the sanding table through the hole under
the sanding disc. Tighten the table lock
knob at the left hand side of the bandsaw
until the table is held firmly.
The sanding table is slotted for use with the
mitre guide supplied with your bandsaw.
The sanding table can be tilted to 45° for
bevel and compound mitre sanding.
For best results, set the bandsaw at high
speed. (See CHANGING SPEEDS page 9).
Replacement sandpaper discs are available
Fig.17.
from the Draper Stockist (see optional
accessories page15). They can be obtained
in four grits and are self-adhesive so that no
glue is required to fix them to the aluminium
disc.
- 12 -