Draper 59085 Instructions - Page 3

Browse online or download pdf Instructions for Air Compressor Draper 59085. Draper 59085 4 pages. Universal valve spring compressor

Print Page

8. Check that the valve adaptor lines up correctly

with the valve holder. If the adaptor does not

line up correctly, adjust the support bar, upright

supports or compression

handle/valve adaptor as necessary.

9. Once the valve adaptor is lined up correctly

tighten the upright support bolts.

10.Re-check that the air supply is correct, line up

the valve adaptor and depress handle. The

valve spring will then be depressed and the

collets can be removed.

11. Renew valve stem seal or spring, replace collets

by re-compressing the spring and re-inserting

the collets.

12.Repeat instructions 5-11 for other valves as

necessary.

NOTE: These instructions are for guidance only

for concise and detailed instructions refer to the

Vehicle Manufacturer's service manual or

relevant Hayne's Service manual.

Fig.4.

Fig.5.