Draper 65026 Instructions Manual - Page 6

Browse online or download pdf Instructions Manual for Grinder Draper 65026. Draper 65026 12 pages. Variable speed die grinder

Fig.1
✚✌
✛✌
Fig.1
1. Variable Speed Switch
2. Rating Plate
3. Housing/Handgrip
4. On/Off Switch
IMPORTANT
Make sure that mains voltages match the voltage
stated on the machine's rating plate.
GUARD
Given the particular type of operation for which the
machine will be used, it has not been fitted with a
protective guard on the grinding point. Therefore
extreme care must be taken when the grinding
point is inserted and the motor has been started.
SWITCH
The switch fitted to the die grinder prevents
accidental machine starting. However, a locking
position has also been provided.
Starting – Push the slide ✪✌ forwards until it
locks into position (direction I), in this position the
switch is locked "ON". (Fig.2).
WARNING
To unlock the switch, press the slide towards
the position "0". (Fig.2).
GETTING TO KNOW YOUR DIE GRINDER
✙✌
OPERATION & USE
✖✌
✘✌
✜✌
5. Head
6. Collet Shaft
7. Collet Nut
8. Wrench × 2
Fig.2
- 5 -
✗✌
✪✌
✕✌