Draper 70300 User Manual - Page 14
Browse online or download pdf User Manual for Grinder Draper 70300. Draper 70300 20 pages. Angle grinder/cut-off tool
Print Page
8.
PREPARING THE ANGLE GRINDER
8.1 FITTING/REPLACING ACCESSORIES
Warning!
Prior to mounting an abrasive wheel ensure the expiry date has not expired, rendering it potentially
hazardous.
Warning!
Selection of the correct accessory, suitable for the intended application is vital. Seek guidance if
uncertain of selection.
Warning!
The rated (no load) revolutions per minute of the tool must not exceed the speed capacity of the
accessory. Please refer to the accessory manufacturers instructions for information.
Visual Inspection:
–
Prior to fitting, abrasive/superabrasive wheels shall be subject to a visual inspection.
Inspection:
–
Each time after mounting, the abrasive/superabrasive wheel shall be test run for a
reasonable time.
–
The specified maximum operating speed of the wheel shall not be exceeded.
–
Damaged abrasives shall be destroyed.
–
Always wear approved safety goggles.
– 14 –