Draper 83607 Instructions Manual - Page 5

Browse online or download pdf Instructions Manual for Grinder Draper 83607. Draper 83607 20 pages. 2100w 230v 230mm angle grinder

Print Page

INTRODUCTION

This hand held power tool uses abrasive discs to grind metals or masonry. It is intended for

D.I.Y and light commercial use only. Any other application is considered misuse.

Stock no ........................................................................................................................... 83607

Part no .......................................................................................................................... AG2100

Motor:

Rated voltage ........................................................................................................ 230V

Rated frequency ................................................................................................... 50Hz

Rated input ........................................................................................................ 2100W

Revolutions per minute (no load) ............................................................... 6,000min

Disc Diameter ............................................................................................................... 230mm

Spindle thread ................................................................................................................... M14

Vibration level ..........................................................................................9.227m/s

Sound pressure level ........................................................................................ 99.75dB(A) K=3

Sound power level ....................................................................................... 110.75dB(A) K=3

Weight (machine only) .................................................................................................... 6.6kg

4.3 HANDLING & STORAGE

The environment will have a negative result on its operation if you are not careful. If the air

is damp, components will rust. If the machine is unprotected from dust and debris;

components will become clogged: And if not cleaned and maintained correctly or regularly

the machine will not perform at its best.

-1

K=1.5m/s