Draper FlexShade Instructions Manual - Page 5

Browse online or download pdf Instructions Manual for Indoor Furnishing Draper FlexShade. Draper FlexShade 7 pages. Exterior clutch-operated shade
Also for Draper FlexShade: Installation & Operation Manual (8 pages), Installation Instructions (2 pages), Instructions Manual (12 pages), Installation & Operation Instructions (11 pages), Instructions Installation & Operation (12 pages), Instructions Installation & Operation (16 pages), Instructions Installation & Operation (4 pages), Instructions Installation & Operation (12 pages), Instructions Installation & Operation (16 pages)

Print Page
Draper FlexShade Instructions Manual
Dual Roller 12V Battery FlexShade

Section 4 - Pocket Headbox Installation

PLEASE NOTE: Installer must provide adequate clearance for
removal of Roller Assembly during installation and maintenance.
PLEASE NOTE: Headbox must be mounted directly to ceiling, or
to a continuous blocking that is secured to building structure.
Figure 6-B
1.
2.
Mark location of optional
pre-drilled pocket
mounting holes and
endcap mounting holes
on top side of headbox
on mounting surface.
Figure 6-D
Endcaps mounted
to continuous
blocking (by others)
secured to
building
structure.
Lift headbox into
mounting position.
®
Figure 6-A
Figure 6-C
3.
Drill small
starter hole
(if necessary)
in mounting
surface.
Closure
Panel
Headbox
Closure
Headbox
Panel
Ceiling
(by others)
page 5 of 7
4.
Mount pocket
headbox using
appropriate
fasteners for
surface.
5.
Mount endcaps using
appropriate fasteners
for surface
.
(Section 1)
6.
Mount pocket
closure.
.
(Fig. 6-D)