Draper 63124 Instructions Manual - Page 8

Browse online or download pdf Instructions Manual for Sander Draper 63124. Draper 63124 12 pages. Random orbit sander

Print Page

SELECTING THE RIGHT SANDING DISC:

Select the correct grade of sanding disc for the material being sanded and finish required (see the table

below as a guide).

APPLICATION

Sanding damaged bodywork

Polyester fillers, rough finish

Sanding off old paint

Surface sanding on paint

Rough sanding fibreglass/Reinforced plastics

Sanding Natural finish woods

NOTE:

Replace a damaged sanding pad immediately.

Never start the tool with the sanding pad loose or

unattached.

SANDING TIPS:

To achieve the best sanding results move the

sander in large orbits across the workpiece. To

avoid deep sanding do not tilt the sander

(Fig.7.).

ROUGH FINISH:

Applying only light pressure to the sander will

allow more surface removal for the workpiece.

FINE FINISH:

When more pressure is applied to the sander, the

sanding plate will rotate slower, but the random

orbit motion will remain the same. The finish will

be similar to an orbital sander.

NOTE:

The sander must be used for dry work only.

OPERATION & USE Cont.

GRADE

80-120 grit

40-80 grit

120 grit

40-80 grit

120grit

Fig.6.

- 7 -

Fig.7.