Draper 65084 Original Instructions Manual - Page 7
Browse online or download pdf Original Instructions Manual for Sander Draper 65084. Draper 65084 20 pages. Dual action air composite sander
Also for Draper 65084: User Manual (16 pages)
Print Page
4. Health and Safety Information
Vibration Hazards
• Exposure to vibration can cause disabling damage to
the nerves and blood supply of the hands and arms.
• Wear warm clothing when working in cold conditions
and keep your hands warm and dry.
• If you experience numbness, tingling, pain or
whitening of the skin in your fingers or hands,
stop using the sander and consult a qualified
health professional.
• Operate and maintain the sander appropriately to
prevent unnecessary increase in vibration emissions.
• The risks from vibration hazards are increased when
grip force on the tool is higher.
− Hold the sander with a light but safe grip,
keeping in mind that your grip may need to be
altered to react to unexpected forces.
4.2 Additional Safety Instructions for
Pneumatic Tools
WARNING!
Compressed air can cause severe injury.
− ALWAYS turn off and disconnect the air supply
before making any adjustments or repairs to the
product or leaving it unattended.
− NEVER direct compressed air towards yourself
or others.
− Ensure that compressed air is not blocked by or in
contact with any part of your body.
• ONLY use clean, dry and regulated compressed air.
WARNING! NEVER use oxygen, combustible
gases or other bottled gases as a supply for
this product. Use of these substances may
cause the product to explode.
• Draper Tools recommends the use of a whip hose
between the tool and the air supply to reduce
vibration.
WARNING! Whipping hoses can cause severe
injury. Always check for and replace
damaged or loose hoses and fittings.
• Ensure that the product is compatible with the air
supply before use.
• Ensure all connections are securely tightened.
• Where universal twist couplings (claw couplings) are
used, lock pins must be installed and whipcheck
safety cables must be used to safeguard against
possible hose-to-tool or hose-to-hose failure.
• DO NOT exceed the maximum stated air pressure.
• DO NOT obstruct the ability of the trigger to release
once depressed.
• NEVER carry the tool by the air line.
4.3 Residual Risk
The safety instructions in this manual cannot account
for all possible conditions and situations that may
occur. Exercise common sense and caution when using
this product and protect against any additional
conceivable risks.
– 7 –
EN