Bosch WOE802D0IN Instruction Manual And Installation Instructions - Page 17
Browse online or download pdf Instruction Manual And Installation Instructions for Washer Bosch WOE802D0IN. Bosch WOE802D0IN 36 pages. Top-loader c series
Print Page
0
Buttons
Program setting
Once you have set a program, you will be shown default program settings. These are recommendations for
the set program and may vary. Depending on the program, you can adjust or activate/deactivate the pro-
gram settings to optimise the washing process for your laundry.
You can find out how to adjust program settings on ~ Page 20
N wash/Wash
O Rinse
0 Spin
Program
Water Level
Temp.
SpeedPerfect/
Speed Perfect
Function
Once the programme has been set, the wash cycle's preset duration will be dis-
played.You can adjust the duration of the wash cycle.
Adjusting the number of rinse cycles:
Once the program has been set, the preset number of rinse cycles will be displayed.
You can adjust the number of rinse cycles.
Adjusting the duration of the spin cycle:
Once the program has been set, the spin cycle's default duration will be displayed.
You can adjust the duration of the spin cycle.
Rinse Hold:
If you deselect the spin cycle, your laundry will remain in water after the final rinse
cycle.
For reducing creasing when the laundry is not taken out of the appliance immediately
after the program ends.
When you switch on the appliance, the Auto Start/One Touch Start program is set
by default. If required, you can change the program before the program starts.
Once the program has been set, the program's default water level will be displayed.
You can adjust the water level if required.
Notes
If the water level is not shown on the display, the program you are using is one in
■
which the appliance automatically adjusts the water level according to the size of
the load. You can still manually adjust the water level when using these programs
if you need to.
Only set a low water level for light loads.
■
cold/Cold: Draw water from the cold water supply hose only.
warm/Warm: Draw water from the hot and cold water supply hoses.
hot/Hot: Draw water from the hot water supply hose only.
Note:
Depending on the appliance specifications, water may be drawn from both hot
and cold water supply hoses in the hot/Hot setting.
For a shorter wash time with a comparable washing result to the standard program
setting. Please note that the energy consumption with this setting is higher than with
standard program settings.
Pressing the Temp., Water Level or Delay start/Delay Start button resets the
Note:
SpeedPerfect/Speed Perfect setting.
Programme overview
en
17