AirStage AUXK036GLAH Installation Manual - Page 3

Browse online or download pdf Installation Manual for Air Conditioner AirStage AUXK036GLAH. AirStage AUXK036GLAH 13 pages. Indoor unit (cassette type)

Print Page

2.3. Accessories

For installation purposes, be sure to use the parts supplied by the manufacturer or other

prescribed parts.

The use of non-prescribed parts can cause serious accidents such as the unit to fall,

water leakage, electric shock, or fire.

The following installation parts are furnished. Use them as required.

Keep the Installation Manual in a safe place and do not discard any other accessories

until the installation work has been completed.

Name and Shape

Operation manual

Installation manual

Operating Manual

(CD-ROM)

Cable tie (Large)

Push mount cable tie

Coupler heat insulation (Small)

Coupler heat insulation (Large)

Template (Carton top)

Washer

Insulation

Drain hose

Hose band

Drain pipe insulation

2.4. Optional parts

Description

Model

UTY-XWZXZC

UTY-XWZXZB

External connect kit

UTY-XWZXZD

UTY-XWZXZ7

UTY-XWZXZE

IR receiver kit

UTY-LBHXD

WARNING

Q'ty

Application

(This book)

For fixing the connection pipe

(Large and Small).

For transmission and remote

controller cable binding.

For indoor side pipe joint

(Small).

For indoor side pipe joint

(Large).

For installing indoor unit.

For installing drain pipe

For installing drain pipe.

VP25 (O.D.32, I.D.25)

For installing drain hose.

For installing drain pipe.

Application

For output function.

(Output terminal / CNB01)

For control input function.

(Apply voltage terminal / CNA01)

For control input function.

(Dry contact terminal / CNA02)

For forced thermostat off function.

(Apply voltage terminal / CNA03)

For forced thermostat off function.

(Dry contact terminal / CNA04)

For air conditioner operation.

Human sensor kit

UTY-SHZXC

Wide panel

UTG-AKXA-W

Panel spacer

UTG-BKXA-W

Air outlet shutter plate

UTR-YDZK

Insulation kit for high

UTZ-KXRA

humidity

Fresh air intake kit

UTZ-VXRA

3. INSTALLATION WORK

Correct initial installation location is important because it is difficult to move unit after it is

installed.

3.1. Selecting an installation location

Decide the mounting position together with the customer as follows.

Select installation locations that can properly support the weight of the indoor. Install the

units securely so that they do not topple or fall.

Do not install the unit in the following areas:

• Area with high salt content, such as at the seaside.

It will deteriorate metal parts, causing the parts to fail or the unit to leak water.

• Area filled with mineral oil or containing a large amount of splashed oil or steam, such

as a kitchen.

It will deteriorate plastic parts, causing the parts to fail or the unit to leak water.

• Area that generates substances that adversely affect the equipment, such as sulfuric

gas, chlorine gas, acid, or alkali.

It will cause the copper pipes and brazed joints to corrode, which can cause refrigerant

leakage.

• Area that can cause combustible gas to leak, contains suspended carbon fibers or

flammable dust, or volatile inflammables such as paint thinner or gasoline.

If gas leaks and settles around the unit, it can cause a fire.

• Area where animals may urinate on the unit or ammonia may be generated.

Do not use the unit for special purposes, such as storing food, raising animals, growing

plants, or preserving precision devices or art objects.

It can degrade the quality of the preserved or stored objects.

Do not install where there is the danger of combustible gas leakage.

Do not install the unit near a source of heat, steam, or flammable gas.

Install the unit where drainage does not cause any trouble.

Install the indoor unit, power supply cable, transmission cable, and remote controller

cable at least 1 m away from a television or radio receivers. The purpose of this is to

prevent TV reception interference or radio noise.

(Even if they are installed more than 1 m apart, you could still receive noise under some

signal conditions.)

If children under 10 years old may approach the unit, take preventive measures so that

they cannot reach the unit.

Use the "Insulation kit for high humidity" (option), when the condition under the roof

is over 80% in humidity and over 30°C in temperature. Otherwise, there is a risk of

condensation on the ceiling.

Decide the mounting position with the customer as follows:

(1) Install the indoor unit on a place having a sufficient strength so that it withstands

against the weight of the indoor unit.

(2) The inlet and outlet ports should not be obstructed; the air should be able to blow all

over the room.

(3) Leave the space required to service the air conditioner.

(4) A place from where the air can be distributed evenly throughout the room by the unit.

(5) Install the unit where connection to the outdoor unit (or RB unit) is easy.

(6) Install the unit where the connection pipe can be easily installed.

(7) Install the unit where the drain pipe can be easily installed.

(8) Install the unit where noise and vibrations are not amplified.

(9) Take servicing, etc., into consideration and leave the spaces. Also install the unit

where the filter can be removed.

To prevent waste of electricity, this

function controls the temperature setting

when no one is occupying the room.

Wide panel hides the gap between the

ceiling hole and the Cassette grille.

Installation in a space of 56 mm or

greater is possible by using panel

spacer when the height behind the

ceiling is low.

Install the plate at outlet when carrying

out 3-way direction operation.

Install when the condition under the roof

is over 80% in humidity and over 30°C

in temperature.

To take fresh air.

WARNING

CAUTION

En-2