Bosch 46 HBN 44 Use And Care Manual - Page 11
Browse online or download pdf Use And Care Manual for Oven Bosch 46 HBN 44. Bosch 46 HBN 44 48 pages. Electric built-in single & double oven
Also for Bosch 46 HBN 44: Use And Care Manual (48 pages), Installation Instructions Manual (28 pages), Installation Instructions Manual (28 pages)
Print Page
Oven
Programmer
The oven programmer
can be used
to electroni-
cally
control
the cooking
in your oven. Figure
4
shows
all the call-outs
that are available
on the
display
and their
locations.
The buttons
directly
adjacent
to the display
are the programming
but-
tons. These are used to program
the oven, includ-
ing setting the clock.
SET (_)
DELAY _
_
_
$TART _
Time
,
T,M_!) O-
Figure
4.
Setting
the Electronic
Clock
When you first turn on the power to your oven, or
if the power
to the oven has been off for a while
the display
will come on showing
all the call-outs,
as shown in Figure 4, and then will become
blank,
with dashes
in the display
area and the set clock
symbol
in the upper
right of the programmer
dis-
play, as shown in Figure
5.
@
@
\.
J
Figure
5.
To set time
of day
Press
in Set
Clock
button.
A "beep"
will
be
heard.
Then press either
the plus (+) or minus (-)
button,
to the right of
the display,
to set the cor-
rect time.
If the plus
(+) or minus
(-) button
is
pressed
it will advance
or decrease
the time in 1
minute
increments,
if the plus
(+) or minus
(-)
button
is held in the minutes
will increase
or de-
crease
in 10 minute
increments.
Once the time is
properly
set depress
the Set Clock
button again to
enter the time. A "beep"
will sound
and the Set
Clock symbol,
in the upper right, will disappear.
To change
the time of day simply repeat
the steps
described
above.
To check
the time of day when
the timer is in use depress
the Set Clock
button.
The time of day will be displayed
briefly
and then
will return to the timer function.
Timer
The timer acts as a kitchen
timer,
counting
down
from the set time.
To Set Timer
• Press
Timer
button.
A "beep"
will be heard
and the display
will change
from showing
the
time
of day to read
zero
(.00)
and say SET
TIMER,
to the right, as shown in Figure
6.
• Then press either
the plus (+) or minus
(-) but-
ton, to the right of the display,
to set the timer
to the time interval
desired.
HR
SET
TINEB
Figure
6.
Notes:
1. Each
time
the plus
(+) or minus
(-)
button is depressed
the display
will in-
crease
or decrease
in 1 minute
incre-
ments. If the plus (+) or minus
(-) but-
ton is held in the display
will increase
or decrease
in 10 minute increments.
2. If the plus (+) or minus
(-) button
is
not depressed
within
5 seconds
of de-
pressing
the Timer
button
the Timer
button
will have to be depressed
again
to again call up the timer mode.
• Once the desired time interval is set release the
buttons.
• The timing
interval will start after approxi-
mately 4 seconds.