ADVANCED EV ADVENT 8 Manual - Page 8

Browse online or download pdf Manual for Golf Cars ADVANCED EV ADVENT 8. ADVANCED EV ADVENT 8 19 pages.

Print Page

Operation And Control

Completely stopping car before shifting F/R switch. When shifting F/R

switch, please turn switch to middle position for 2s at first, then choosing

Forward switch or Reverse switch. Don't shift F/R switch in a hurry in

case that the sensor will be burnt or switch will be out of use.

Turning on Main Switch

1. Shifting the switch to RUN position

then can turn on the power supply of

car.

2. Shifting the switch to OFF position

then can turn off the power supply of

car.

Key Switch

1. Plugging the key and turn right then

can turn on the key switch (Note:

Shifting the F/R switch to the middle

position before turning on key switch).

2. Turning left and then can turn off the

switch. Switch can be removed only at

this state.

Forward/Reverse Switch

The Forward/Reverse Switch is used to

shift the car to forward, reverse or

stop. Forward for upward, Reverse for

downward, Park for middle. When

choosing reverse switch, the reverse

buzzer sounds.

Operation And Control

Combination Switch

1. Turn signal: Move the turn signal lever forward, left

turn signal flashes. At the same time, you'll be able to

see a flashing arrow directed to the left on your

instrument cluster. Move the turn signal lever

backward, the arrow directed to the right on.

2. Low beam: Front part of the lever can be pushed

and pulled. After the vehicle is started, push the lever

forward to turn on low bean and backward to turn off.

3. High beam: move the lever upwards (steering wheel

surface) to turn on high beam. Releasing the lever, it

will automatically return to original position, and the

high beam can be permanently on.

4. Horn: Press lightly on the end of lever, where horn

button is located.

Glove box lock

There are one glove box on each side of instrument

panel, which can be used to store goods. When the

glove box cover is not locked, press the lock head to

open the cover.

Unlock: Insert the key into the lock, rotate in the

clockwise direction to unlock, and then remove the key.

Locking: Close the box cover, insert the key and rotate

in the counterclockwise direction to lock, and then

remove the key.