Bosch 800 Series Installation Manual - Page 10

Print Page

Checking Burner Cap Placement

Check to make sure that there is no gap between the

▯

burner cap and burner base. See illustration below for

correct and incorrect placements of the burner cap.

You may gently try to move the burner cap from side

▯

to side to check if it is properly placed. If properly

placed, the cap will click from side to side as the

prongs hit the groove ridge.

Checking Burner Cap Placement

Install Burner Grates

Properly position and install each burner grate as shown

in the illustration below.

30" 4 Burner

30" 5 Burner

36" 5 Burner

WARNING

To prevent flare-ups, properly support pots and

avoid spills, all grates must be properly positioned

on the cooktop whenever the cooktop is in use.

Each of the four feet must be placed into the

corresponding dimples in the cooktop. Do not use a

grate if the rubber feet are missing or damaged.

For replacement of rubber feet: Call Customer Support

at 1-800-944-2904.