Bosch 800 Series Installation Manual - Page 15

Print Page

Align the base of the hook of the bracket with the base

on the slot of the rear wall fastening bracket. Align the

base of the fastening bracket with the ground and

tighten the screws to fix the measurements.

For wall mounting, proceed with steps 5–7 and 10.

For floor mounting, proceed with steps 8–9 and 10.

Use the specified distance from the side of the

appliance to the bracket holes.

Move the bracket onto the wall and fix with the two

washers and screws. A qualified technician must verify

suitability of the materials in accordance with the type

and condition of the wall.

Use the following distances for the distance from the

side of the appliance to the bracket holes.

After having positioned and leveled the appliance,

move the bracket close to the rear of the appliance

and anchor it to the floor with the two washers and

screws. A qualified technician must verify suitability of

the materials in accordance with the type and

condition of the floor.

Push the cooker towards the wall, and at the same

time, insert the bracket in the plate fastened to the rear

of the appliance.