AirStage UTY-DCGY Installation Manual - Page 6

Browse online or download pdf Installation Manual for Remote Control AirStage UTY-DCGY. AirStage UTY-DCGY 9 pages. Central remote controller
Also for AirStage UTY-DCGY: Installation Manual (11 pages)

Print Page

DIP Switch

No.

OFF

 Disabled

Enabled



6. 4.

Installation Method - Integrated type

6. 4. 1

Integrated type

(1)

Pass power supply

cable through Hole-A, and connect it to the

power supply terminal of the power supply unit PC board.

(2)

Fix with the

cable tie.

Power supply cable

Cable tie (accessory)

(3)

Open the knockouts (2 places), and install the one touch bush (2

pcs, accessories).

(4)

Connect the connector of

relay connector of the cable coming from the power supply unit

PC board.

One touch bush (accessories)

knockout

Hole-B

Connection cable

(accessory)

knockout

Hole-C

One touch bush

(accessories)

(5)

Pass

Connection cable (accessory) through Hole-C and Hole-D,

and connect it to rear panel terminal.

En-5

Details

For enabling/disabling the backup

function.

Not used. Fixed to "OFF".

(  :Factory setting)

Hole-A

POWER SUPPLY

L N

Power supply terminal

Connection cable (accessory) to the

Hole-A

Relay connector

(6)

Pass transmission cable through Hole-B, Hole-C, and Hole-D,

and connect it to rear panel terminal. Fix with the cable tie (ac-

cessory).

Transmission cable

Hole-B

Cable tie

(accessory)

Connection cable

(accessory)

Hole-C

Hole-D

(7)

Fix with the

cable tie (accessory).

Cable tie

(accessory)

Connection cable

Transmission cable

Rear panel terminal

Take care so that the earth (ground) cable does

not get into touch with other cables and parts.

(8)

Install the power supply unit to a wall. Then install the power sup-

ply unit cover and rear panel. Be careful not to pinch the cable.

Screw ×4

(9)

Connect the connection cable connector to the connector (CN13)

of the front panel PC board.

Hole-A

+5V

GND

Screw ×6

(accessories)