Bosch HB.74 1 Series Instruction Manual - Page 9
Browse online or download pdf Instruction Manual for Oven Bosch HB.74 1 Series. Bosch HB.74 1 Series 28 pages.
Print Page
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel.
To view the timer
, the cooking time
V
the time
, press the
sensor repeatedly until the required
0
0
symbol lights up. The corresponding value will be shown for a
few seconds on the display panel.
Time
Once the oven has been connected or after a power cut, the
and
:
symbols light up on the display panel.Set the clock
‹
‹‹
to the right time.
Press the
sensor.
0
1.
The time is displayed
‚ƒ
Set the time with the
or
@
2.
Changing the basic settings
This oven has different basic settings. The settings can be
adapted to the user's own needs.
Basic setting
Duration of signal after the cooking
™‚
time or the time set on the timer
has elapsed
Time indicator
™ƒ
Time until a setting is applied
™„
The shelf support rails have been
™†
refitted.
Select default settings for all val-
™‡
ues.
* Default setting
The oven must be switched off.
Press the
0
sensor for approximately 4 seconds.
1.
The display panel will show the current basic setting for the
duration of the signal, e.g.,
Change the basic setting using the
2.
Automatic shut off
If the settings of the appliance are not changed for several
hours it is automatically shut off. The oven will stop heating.
This depends on the temperature or grill power selected.
Automatic shut off is activated
A signal will sound. The display shows
heating.
Turn the function control knob to the zero setting. The oven
switches off.
Cancelling the automatic shut off function
To avoid triggering the automatic shut off, a cooking time must
be set. The oven will heat until this time is up.
, the end time
x
:
‹‹
.
sensors.
A
Option 0
-
no
-
no
no*
Option
.
™‚
ƒ
or
sensors.
@
A
"‰
. The oven will stop
Confirm the time with the
3.
The programmed time is displayed after a few seconds.
Changing the time
or
y
No other time function must be programmed, the oven must be
switched off.
Press the
0
1.
The display panel displays
Set the time with the
2.
0
Confirm the time with the
3.
The programmed time is displayed after a few seconds.
Hiding the time
The time can be hidden. See the Modifying basic settings
chapter.
Option 1
approx. 10 sec
yes*
approx. 2 sec
yes
yes
Confirm with the sensor
3.
The display panel shows the following basic setting. The
sensor allows you to run through all the settings and the
or
sensors allow you to modify them.
@
A
Finally, press the
4.
All basic settings have been applied.
The basic settings can be changed again at any time.
0
sensor.
sensor twice.
.
0
or
sensors.
@
A
sensor.
0
Option 2
approx. 2 min*
-
approx. 4 sec*
-
-
.
0
0
sensor for approximately 4 seconds.
Option 3
approx. 5 min
-
approx. 10 sec
-
-
0
9