Electrolux 300 Series Use & Care Manual - Page 16

Browse online or download pdf Use & Care Manual for Washer Electrolux 300 Series. Electrolux 300 Series 28 pages. Front load dryer
Also for Electrolux 300 Series: Owner's Manual (11 pages), Use & Care Manual (39 pages), Installation Instructions Manual (50 pages), Use & Care Manual (46 pages)

Print Page

16 Controls and Settings

times and temperature settings can be

selected when using this cycle.

The fast dry cycles (on select models)

have preset times of 15, 18 or 20 minutes

(dependent on model) with a preset tem-

perature of high only.

Dryness levels will not be an available option

when using either of the timed drying cycles.

WARNING

To avoid fire hazard, DO NOT use heat

to dry items containing feathers or down,

foam rubber, plastics similarly textured,

rubber-like materials. Use the time dry

cycle and the air dry (no heat) setting.

time dry

Select this cycle to manually set the drying

time from 30 to 75 minutes (depending on

model) for any load.

fast dry (400 series model)

min

Select this cycle to quickly dry small loads

in 20 minutes.

fast dry (500 series model)

min

Select this cycle to quickly dry small loads

in 18 minutes.

fast dry (600 series model)

min

Select this cycle to quickly dry small loads

in 15 minutes.

instant refresh (on select models)

Select this cycle to refresh fabrics, remove

odors and reduce static by injecting the

perfect amount of steam into clothing

that has been left in the dryer, stored in

crowded closets, drawers, or unpacked

luggage.

NOTE

It is not recommended to use fabric soft-

ener sheets with steam cycles or steam

options as it may cause staining on clothes.

Cycle Settings

To set or change the drying temperature,

dryness level, or drying time press the

temp, dryness or time dry buttons to

scroll to the desired settings. The indicator

light for each setting will be illuminated

when selected.

To protect your fabrics, not all tempera-

tures or dryness levels are available with

FIRE HAZARD

every cycle. If a temperature or dryness

level is not appropriate for the cycle, it

cannot be selected and will not be lit when

scrolling through the settings.

NOTE

To change a cycle setting once the cycle

has begun, press the start/pause but-

ton, make the new selection and press

start/pause again.

With exception of the sanitize temperature

setting and the perfect steam

adjustments made to cycle settings and op-

tions will be remembered and recalled each

time that cycle is selected in the future.

To return to factory settings,

press the dryness and options

buttons at the same time and hold

until the signal sounds.

Drying Temperature (temp)

To change the temperature, press the temp

button to scroll to the desired setting.

For best results

Follow the fabric care label in-

structions on items to be dried.

sanitize (on select models)

Recommended for durable fabrics and tow-

els. Use this selection to remove harmful

bacteria from your clothing or other items

where sanitization is desired. This option will

kill 99.9% of bacteria. A higher temperature

is required to kill bacteria. Please check fab-

ric care labels to prevent damage.

high

Recommended for most cotton fabrics.

normal

Recommended for wrinkle free, easy care,

lightweight fabrics and bulky loads.

low (on select models)

Recommended for delicate fabrics.

air dry

This setting (no heat) should only be used

with a time dry cycle to dry items contain-

ing feathers, down, foam rubber, plastics

or rubber-like materials; to refresh clothing,

stuffed animal, pillows or blankets; and to

dust draperies.

option,