Electrolux 400 SERIES Use & Care Manual - Page 9

Browse online or download pdf Use & Care Manual for Washer Electrolux 400 SERIES. Electrolux 400 SERIES 39 pages. Front load dryer
Also for Electrolux 400 SERIES: Use & Care Manual (16 pages), Installation Instructions Manual (50 pages), Use & Care Manual (28 pages), Use & Care Manual (46 pages)

Print Page

STEPS

5. Add wash

• Water conditioners, detergent boosters

and enzyme products may be added with

products to

detergent.

dispenser.

• See Adding Laundry Products for detailed

information on the use of the product

dispensers.

• See Adding Laundry Products for detailed

information on the use of various wash

products (detergent, bleach, stain treat-

ment, fabric softener, etc).

• See Cycle Selection, Cycle Settings, and

6. Select the

Cycle Options for detailed descriptions of

cycle and

cycle controls.

settings for

the load.

• See Cycle Setting Charts to determine

which settings are available for each

cycle.

• To provide the best care, not every setting

or option is available with every cycle. If

a setting or option is not available for the

cycle selected, the indicator will not light.

7. Start the

• Close the door and press start/pause.

The washer will not operate with the door

washer.

open. "CLOSE DOOR" will be displayed

as a reminder to close the door.

• To add a forgotten item to the washer

any time during the wash portion of the

cycle, press start/pause. When the door

unlocks, open the door, add the item,

close the door and press start/pause to

resume cycle.

• To change settings or options after the

cycle has begun, press start/pause,

change the settings, and then press

start/pause. If the cycle is not paused

first, the unit will emit several beeps when

the buttons are pressed but no changes

to the cycle will be applied.

• To change the cycle once the cycle has

begun, press cancel to cancel the cycle,

select the new cycle, and press start/

pause to begin the new cycle. Changing

a cycle selection without cancelling the

current WILL NOT change the cycle.

• To cancel a cycle, press cancel.

• A signal will sound at the end of the cycle

if the chime option is not set to mute.

8. Remove

• Remove items when the cycle ends and

items from

place in dryer, line dry or dry flat as di-

rected on the fabric care label.

washer

when cycle

has ended.

PODS

is a registered trademark of Procter & Gamble Company, Cincinnati OH, used under license by Electrolux.

Operating Instructions

TIPS

IMPORTANT

Follow manufacturer's in-

structions and recommen-

dations when using wash

products.

Open and close the dis-

penser drawer slowly.

Closing the drawer too

quickly could result in early

dispensing of the bleach or

fabric softener.

Follow fabric care label in-

structions on items to

be washed.

Make sure that the PODS

option is selected when

using models that have a

separate detergent pack

compartment. See Adding

Laundry Detergent to the

Adaptive Dispenser™

DO NOT force door open.

As a safety measure, the

door will automatically lock

during the entire wash

cycle. Pause or cancel

the wash load to unlock

the door.

If the cycle is interrupted

during spin, the door lock

will not release until the tub

has stopped spinning.

If the water level is above

the bottom of the door

opening/flexible door gas-

ket, the lock will not re-

lease.

Excess wrinkling, color

transfer or odors may

develop in items left in the

washer after the cycle has

ended.