Electrolux 400 SERIES Use & Care Manual - Page 33

Browse online or download pdf Use & Care Manual for Washer Electrolux 400 SERIES. Electrolux 400 SERIES 46 pages. Front load dryer
Also for Electrolux 400 SERIES: Use & Care Manual (16 pages), Use & Care Manual (39 pages), Installation Instructions Manual (50 pages), Use & Care Manual (28 pages)

Print Page

Dryness level (dryness)

To set or change the dryness level, press

the dryness button to scroll to the desired

setting.

The dryness levels include max (on select

models), high, normal, less (on select

models), and damp. Most Auto Dry cycles

default to the normal dryness level.

Occasionally a load may seem too damp

or over-dried at the end of the cycle. To

increase drying time for similar loads in the

future, select high or max (on select mod-

els). To decrease drying time for similar

loads, select less (on select models).

Select damp for items you wish to partially

dry before hanging or ironing.

Drying time (time dry)

Manually select or change the drying time

for a time dry cycle (on select models)

by pressing the time dry button to scroll

though the available options. Time dry

options include 30, 45, 60 and 75 minutes

(dependent on model).

The auto selection is a default for all auto

dry cycles and fast dry cycles and can-

not be selected or changed. All actual or

predicted dry times will count down on the

LED display.

Cycle options

To select an option, press options and

scroll though the options until the indicator

light for the desired option flashes, then

press select (set). The indicator will illumi-

nate when the option has been selected.

Follow the same steps to deselect an

option. The indicator light will turn off when

the option is deselected.

options

NOTE

To change a cycle option once the cycle

has begun, press the start/pause

button, make the new selection and

press start/pause again.

To protect your fabrics, not all options are

available with every cycle. If an option is

not available for a cycle, the indicator will

not light.

Occasionally, two options or settings in the

same cycle will conflict with each other, like

Controls and Settings

select

de-select

eco option and sanitize temperature (on

select models). When this happens, the

option selected first will cause the conflict-

ing option to not be selectable.

perfect steam

The perfect steam

into the clothing prior to cool down to

reduce wrinkling, ironing and static cling.

NOTE

It is not recommended to use fabric

softener sheets with steam cycles or steam

options as it may cause staining on clothes.

anti-static (on select models)

The anti-static option injects steam into

the clothing just before cycle completion to

reduce static.

eco

The eco option reduces the dry-

ing temperature a few degrees

to save energy. In conjunction

with automatic moisture sensors, cycle

times will increase slightly, but overall en-

ergy usage will decrease. The eco icon will

illuminate on the LED display to indicate

the eco option is activated.

wrinkle release

The wrinkle release option helps prevent

wrinkles and tangling by tumbling the dry

load without heat for 5 minutes out of every

10 minutes. The 5 minutes on and 5 min-

utes off is repeated for a total 45 minutes.

A chime will sound after each tumble as a

reminder to remove the dried load.

extended tumble (on select models)

Select the extended tumble option if the

dried load might not be removed promptly

at the end of the cycle. The dried load will

tumble continuously without heat for 30

minutes. A chime will sound periodically to

remind you to remove the dried load.

NOTE

When extended tumble and wrinkle

release options are both selected the

amount of time the load will tumble with-

out heat will increase to a period of up to

75 minutes.

delay time (on select models)

Use delay time to delay the

start of the drying cycle to a time

convenient to your schedule or

(on select models)

option injects steam