Electrolux EFLS210TIS Use & Care Manual - Page 13

Browse online or download pdf Use & Care Manual for Washer Electrolux EFLS210TIS. Electrolux EFLS210TIS 29 pages. Front load dryer
Also for Electrolux EFLS210TIS: Use & Care Manual (22 pages)

Print Page

Cycle Settings

For best results

Follow the fabric care label

instructions on items to be

washed.

Appropriate wash temperature, spin speeds, soil level and

options will be displayed for each cycle. The settings can

be changed before the cycle is started. Make modifications

according to fiber content, colorfastness and soil level. If

changes are attempted after the cycle starts a signal will beep

and " Not possible " will be displayed.

NOTE

To change settings after the cycle starts, press Pause, adjust

the setting and press Start to resume the cycle.

Wash Water Temperature

To change the preset temperature, press the temperature icon

to scroll to the desired setting. A cold water rinse saves energy

and reduces wrinkling.

To protect your fabrics, not all temperatures are available with

every cycle. The indicator will not light if the setting is not

available with that cycle.

Wash water temperatures are automatically regulated to

maximize detergent effectiveness and improve washing

performance. The water heater setting and its distance from the

washer, water usage in other parts of the home, and seasonally

low ground water temperature in some geographic areas can

affect water temperature.

sanitize

This setting sanitizes heavily soiled colorfast fabrics such as

towels, bedding, and children's clothing by killing 99.9% of

bacteria using wash water heated with a boost heater. Cold

water is used to cool and rinse the load.

NOTE

Only sanitizing cycles have been designed to meet the

requirements of NSF P172 protocol for sanitization efficacy.

Sanitization Performance of Residential

and Commercial, Family-Sized Clothes

Washers

hot

Use this setting for heavily soiled white or colorfast cottons

and blends.

warm

Use this setting for normally soiled white or colorfast cottons

or blends.

NSF Protocol P172

Operating Instructions

cold

Some warm water will automatically blend with cold tap

supply to achieve a precise cold. Use this setting for lightly

soiled non-colorfast items, knits, delicates, and hand

washables.

eco cold

Wash and rinse temperatures are equivalent to temperature

of cold tap supply. Use this selection for fabrics and colors

that are prone to dye transfer. For use with cold water

detergents.

Spin Speed

Max, high, medium and low spin speeds are available for

each cycle. The spin speed and/or duration of final spin vary

from model to model and cycle to cycle.

Increasing the spin speed will extract more water, decrease

drying time and conserve energy. Decreasing the spin speed

will reduce wrinkling.

Select low spin speed to gently spin items that should be line

dried.

Use no spin to omit all intermediate spinning phases and the

final spin at the end of the cycle. The load will be very wet.

Remove items from the wash drum to drip dry or select a rinse

& spin cycle to remove excess water at a more convenient

time.

Soil Level

Adjust the wash time based on the soil level of each load. Extra

heavy, heavy, medium, light, and extra light soil levels are

available.

Cycle Options

To add options, press the corresponding option's icon to

illuminate the selection desired. To delete options, press the

option's icon again and the indicator light will turn off. Not all

options are available on every model. To protect your fabrics,

not all options are available with every cycle. If an option

is not appropriate for the cycle, the indicator will not light.

Occasionally, a setting and option in the same cycle will conflict

with each other, like no spin (or low spin) and eco friendly.

When this happens, the eco friendly option will override any

incompatible selections.

NOTE

To change the options once the cycle has begun, press the

Pause button, make the new selection and press Start

again.

prewash

Select this option to add a short initial wash period to a

cycle. Heavily soiled and stained loads will prewash for

approximately 15-20 minutes. The water will drain and the

load will automatically advance to the regular wash cycle.

fresh rinse

Use this option when additional rinsing is desired to remove

excess dirt and detergent. It is recommended for heavily

soiled loads or if household members have sensitive skin.

eco friendly

The eco friendly option reduces the amount of hot water usage

and total cycle duration to to save energy. See Washer Settings

Chart for compatible cycles.