Bosch HBA73A5 0J Series Instruction Manual - Page 10
Browse online or download pdf Instruction Manual for Oven Bosch HBA73A5 0J Series. Bosch HBA73A5 0J Series 28 pages.
Print PageChecking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The symbol for the time-setting
option that is visible in the display is shown in brackets.
To call up the
timer,
U
r
clock, press the
button repeatedly until the brackets are
0
around the relevant symbol. The display shows the value for a
few seconds.
End time
You can change the time at which you wish your dish to be
ready. The oven starts automatically and finishes at the desired
time. You can, for example, put your dish in the cooking
compartment in the morning and set the cooking time so that it
is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
Example in the picture: it is 10:30 am, the cooking time is
45 minutes and the oven is required to finish cooking at
12:30 pm.
Adjust the function selector.
1.
Set the temperature selector.
2.
Press the
0
button twice.
3.
Use the
or
button to set the cooking time.
@
A
4.
Press the
button.
0
5.
The brackets are around
ready is displayed.
Use the
or
button to set a later end time.
@
A
6.
After a few seconds, the oven adopts the settings and switches
to standby position. The time at which the dish will be ready is
Childproof lock
The oven has a childproof lock to prevent children switching it
on accidentally.
The oven will not react to any settings. The timer and clock can
also be set when the childproof lock has been activated.
Activating the childproof lock
The function selector must be on the zero setting.
Press and hold the
button for approx. four seconds.
D
The
D
symbol appears in the display. The childproof lock is
activated.
10
cooking time,
end time or
p
p
. The time when the dish will be
shown in the display and the
and
0
symbols go out. When the oven starts, you can see the
cooking time counting down in the display and the
in brackets. The
0
The cooking time has elapsed
A signal sounds. The oven stops heating. 00:00 is shown in the
display. Press the
using the
@
or
the function selector to the off position. The oven switches off.
Changing the end time
Use the
@
or
A
seconds, the change is adopted. If the timer has been set, first
press the
button twice. Do not change the end time if the
0
cooking time has already started to elapse. The cooking result
would no longer be correct.
Cancelling the end time
Use the
A
button to reset the end time to the current time. After
a few seconds, the change is adopted. The oven starts. If the
timer has been set, first press the
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The symbol for the time-setting
option that is visible in the display is shown in brackets.
To call up the
clock, press the
around the relevant symbol. The display shows the value for a
few seconds.
Clock
After the appliance is connected or following a power cut,
the
0
symbol and four zeros light up in the display. Set the
clock.
Press the
0
1.
The time 12:00 is shown in the display.
Use the
@
or
2.
After a few seconds, the time that has been set is adopted.
Changing the clock
No other time-setting option should have been set.
Press the
0
1.
The time symbols light up in the display and the brackets are
around
.
0
Use the
@
or
2.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Deactivating the childproof lock
Press and hold the
The
symbol goes out in the display. The childproof lock is
D
deactivated.
p
symbol is in brackets. The
p
symbol goes out.
0
button. You can set a new cooking time
A
button. Or press the
0
button to change the end time. After a few
0
button twice.
U
timer,
r
cooking time,
0
button repeatedly until the brackets are
button.
A
button to set the clock.
button four times.
A
button to change the clock.
D
button for approx. four seconds.
U
r
symbol is
button twice and turn
p
end time or
0