Bosch HBA76B6.0B Instruction Manual - Page 18
Browse online or download pdf Instruction Manual for Oven Bosch HBA76B6.0B. Bosch HBA76B6.0B 36 pages.
Print Page
Problem
The oven door cannot be opened.
is shown in the display. The
displayed.
The oven does not heat up or the type of
heating selected cannot be set.
The oven does not heat up. A small
square lights up in the temperature
display.
"
" appears on the display.
"‰
"
Error messages with
If an error message with
"
button. This cancels the error message. You may then have to
Error message
"‹‚‚
"‚‚†
Replacing the bulb in the oven ceiling light
If the bulb in the oven light fails, it must be replaced. Heat-
resistant, 40 watt spare bulbs can be obtained from our after-
sales service or a specialist retailer. Only use these bulbs.
ã=
Risk of electric shock!
Switch off the circuit breaker in the fuse box.
Place a tea towel in the oven when it is cold to prevent
1.
damage.
Remove the glass cover. To do this, press back the metal
2.
tabs with your thumb (Fig. A).
Unscrew the bulb and replace it with one of the same type
3.
(Fig. B).
After-sales service
Our after-sales service is there for you if your appliance needs
to be repaired. We will always find the right solution in order to
avoid unnecessary visits from a service technician.
E number and FD number
When calling us, please give the product number (E no.) and
the production number (FD no.) so that we can provide you with
the correct advice. The rating plate containing these numbers
can be found on the right-hand side of the oven door. You can
make a note of the numbers of your appliance and the
telephone number of the after-sales service in the space below
to save time should it be required.
E no.
18
Possible cause
Power cut during self-cleaning.
‹‹
:
‹‹
L
symbol is
Type of heating not recognised
The oven is in demo mode.
Automatic switch-off has been
activated. The oven stops heating.
is shown in the display, press the
Possible cause
A button has been pressed for too
long.
The temperature in the cooking
compartment is too high.
FD no.
Note/remedy
Reset the clock. Wait until the
in the display. You can open the oven door again.
Make the settings again.
Switch off the circuit breaker in the fuse box, then
switch it back on after at least 20 seconds. Within
the next 2 minutes, press and hold the
for 4 seconds until the square disappears from the
display.
Press any button.
reset the time. If the error is shown again, call the after-sales
service.
0
You can take remedial action yourself if the following error
messages are displayed.
Note/remedy
Press all buttons individually. Check that the
buttons are clean. If the error message remains,
please contact the after-sales service.
The oven door locks. Wait until the cooking
compartment has cooled down. Clear the error
message with the
$
Refit the glass cover. When doing this, insert it on one side
4.
and press firmly on the other side. The glass cover will click
into place.
Remove the tea towel and switch on the circuit breaker.
5.
Glass cover
You must replace a damaged glass cover. Suitable glass
covers may be obtained from the after-sales service. Please
specify the E number and FD number of your appliance.
After-sales service
Please note that there will be a fee for a visit by a service
technician in the event of a malfunction, even during the
warranty period.
Please find the contact data of all countries in the enclosed
customer service list.
L
symbol goes out
button.
0
%
O
D
button