Bdcom S2210PB Hardware Installation Manual - Page 3
Browse online or download pdf Hardware Installation Manual for Switch Bdcom S2210PB. Bdcom S2210PB 19 pages.
Print Page
Chapter 1
The document describes the characteristics and parameters of S2210PB and gives an
overview of S2210PB.
1.1 Standard Configuration
S2210PB switch has three parts: 8 IEEE802.3af/at 100M Ethernet TX ports, 2 gigabit
Ethernet SFP ports and 1 Console port. See the following table:
100M PoE ports
gigabit Ethernet optical ports
Console port
No.
Abbrev.
1
PWR
2
RESET
3
SYS
S2210PB Switch Overview
Table 1- 1 Attributes of necessary ports
Port
Figure 1- 1 Front template of the S2210PB switch
Table 1- 2 Parts at the front template of the S2210PB switch
Name
power indicator
RESET
System indicator
S2210PB Hardware Installation Manual
Features
TX port: a rate of 10/100M auto-adaptation,
cable
MDI/MDIX
UTP(RJ45) port
Optical port: 100/1000M SFP port, with LINK/
ACT indicators
A rate of 9600bps, RJ45 interface
Remarks
If the switch is powered on, the indicator is
on.
Resume to the default setting.
If the indicator is always on, the system is
auto-identification,
- 1 -