Draytek VigorSwitch FX2120 Quick Start Manual - Page 4
Browse online or download pdf Quick Start Manual for Switch Draytek VigorSwitch FX2120. Draytek VigorSwitch FX2120 11 pages. L2 + managed switch
Also for Draytek VigorSwitch FX2120: Quick Start Manual (11 pages)
Print Page
2
.
P
a
n
e
l
E
x
p
2
.
P
a
n
e
l
E
x
p
Status
LED
Monitor
On (Red)
Blinking
Off
On (Green)
SYS
Blinking (Green)
Off
On
PWR
Off
On (Blue)
Port 1 ~ 12
SFP LNK/ACT
On (Green)
Blinking
Off
Interface
RST
Port 1 ~ 12
Console
l
a
n
a
t
i
o
n
l
a
n
a
t
i
o
n
12V DC Input
Explanation
An alert for system failure due to overheating or wrong voltage.
The system is (TBD)
The device is in normal condition.
The switch finishes system booting and the system is ready.
The switch is powered on and starts system booting.
The power is off or the system is not ready / malfunctioning.
The device is powered on.
The device is powered off or failed.
The device is connected with 10Gbps.
The device is connected with 1000Mbps.
The system is sending or receiving data through the port.
The port is disconnected or the link is failed.
Description
Factory reset button.
Press it to reboot the system. (<5 seconds)
Press it to reset the system with factory default settings. (5~20 seconds)
Port 1 to Port 12 can be used for fiber connection.
Used to perform telnet command control.
SFP LNK/ACT, Port 1 to Port 12
2
Console