Draytek VigorSwitch G2500 Quick Start Manual - Page 10
Browse online or download pdf Quick Start Manual for Switch Draytek VigorSwitch G2500. Draytek VigorSwitch G2500 14 pages. L2 managed gigabit switch
Print Page
On (Green) The device is connected with 1000Mbps.
Port 45 ~ 48
(RJ45 or SFP)
On
(Amber)
Blinking
Off
On (Green) The device is connected with 1000Mbps.
Port 49 ~ 50
On
(SFP)
(Amber)
Blinking
Off
Interface
Port 1 ~ 44 (RJ45)
Port 1 ~ 44 (PoE)
Port 45 ~ 48
(RJ45 or SFP)
Port 49 ~ 50 (SFP)
Slide Switch
(for P2500 only)
Console
The following limitation is suitable for VigorSwitch P2500
Note
Power Output --
IEEE 802.3af Max. 15.4W Output Supported
IEEE 802.3at Max. 30W Output Supported
PoE Power Budget –-
405 Watts (Max)
The device is connected with 10/100Mbps.
The system is sending or receiving data
through the port.
The port is disconnected or the link is failed.
The device is connected with 10/100Mbps.
The system is sending or receiving data
through the port.
The port is disconnected or the link is failed.
Description
Port 1 to Port 44 can be used for Ethernet
connection and PoE connection, depending on
the device connected
Port 45 to Port 48 are used either for Ethernet
or fiber connection.
Port 49 to Port 50 are used for fiber
connection.
Switch the LED function.
Right: PoE connection status.
Left: LAN port connection status.
Used to perform telnet command control.
Power inlet for AC input (100~240V/AC,
50/60Hz).
3
.