Electrolux EW 1067 F Instruction Booklet - Page 13

Browse online or download pdf Instruction Booklet for Washer Electrolux EW 1067 F. Electrolux EW 1067 F 25 pages. Electrolux washing machines

Print Page

132997230•gb

19-04-2001

End of programme

When the programme has finished a flashing zero

is displayed.

If you have selected the Anti-crease option

zero will not flash.

13 START/PAUSE button

This button has three functions:

Start - Pause - Draining of water.

After having selected the required programme, press

this button to start the machine; the corresponding

pilot light stops flashing.

If you have selected the delayed start, the machine

begins its countdown. The duration of the

programme or the delay appears on the display.

To interrupt a programme which is running, depress

the Start/Pause button: the corresponding pilot light

starts to flash.

To restart the programme from the point at which it

was interrupted, press the START/PAUSE button

again.

Draining of water

By depressing the Start/Pause button

• The water of programme "A" (Soak) is emptied out

15:24

Pagina 13

, the

Start

Pause

• The water of the last rinse on programmes with

Anti-crease

option is emptied out and the

laundry is spun.

14 Programme progress display

By selecting the wash programme, the pilot lights

corresponding to the various phases making up the

programme come on.

After the machine has started, only the running

phase pilot light stays on. When the programme has

finished, the End

pilot light comes on.

Prewash

Main wash

Rinses

Stop with water in the tub

Drain

Spin

Clogged filter

End

The END

pilot light flashes in the event of

operating problems.

At the same time one of the following lights starts to

flash and an alarm code appears on the display.

E10 +

= the machine does not fill

E20 +

= the machine does not empty

E40 +

= the door has not been closed

To eliminate the problem, see paragraph "Something

not working".

If at the end of the programme the pilot light

flashes this means that the drain filter must be

cleaned.

Functions

End of programme

When the door locked light has gone out, the door

can be opened. The light

programme progress display illuminates.

A flashing zero appears on the display.

Switch the machine off and remove the laundry.

Turn the programme selector dial to O.

Altering a programme

You can alter the programme before it starts.

When the programme has started, you can only

reset it by turning the programme selector dial to O

and then you can select the new programme.

Start it by depressing the START/PAUSE button.

(END) on the