AirStage UTY-DCGG Installation Manual - Page 8
Browse online or download pdf Installation Manual for Controller AirStage UTY-DCGG. AirStage UTY-DCGG 11 pages. Central remote controller
Also for AirStage UTY-DCGG: Installation Manual (9 pages)
(8)
Install the power supply unit to a wall. Then in-
stall the power supply unit cover and rear panel.
Be careful not to pinch the cable.
Screw ×4
(9)
Connect the connection cable connector to the
connector (CN13) of the front panel PC board.
(10)
Install the front panel to the rear panel.
CN13
*
When installing the front panel to the rear panel, install it care-
fully so that the cable is not pinched or the parts of the circuit
board are not pushed by things projecting from the rear panel.
The circuit board parts may be damaged.
(11)
Install the screw (1 pc) and fix the panels.
En-7
61 51
For the cable, use the service parts to connect the power
supply unit and control unit.
Service parts
Extension cable (5m)
A. Power supply unit wiring
(1)
Screw ×6
(Accessories)
(2)
(3)
(4)
(5)
(6)
Installation Method - Separate type
Name and Shape
Q'ty
1
Pass power supply cable-A through Hole-A,
and connect it to the power supply terminal of
the power supply unit PC board.
Fix with binder firmly.
Binder (accessory)
Power supply
cable-A
POWER SUPPlY
L
N
Open the knockout of hole-B section, and install
the one touch bush.
Pass the extension cable (Service parts)
through Hold-B, and connect it to the relay con-
nector coming from the power supply unit.
Fix with binder firmly.
Extension cable
(service parts)
Binder (accessory)
Hole-B
Relay connector
Install the power supply unit cover, and tighten
the screws (4 pcs).
Application
9708798011
Hole-A
POWER SUPPLY
L N
Hole-B
One touch bush
(accessory)
POWER SUPPLY
L N
Hole-B