Electrolux EW 1233I Instruction Booklet - Page 21

Browse online or download pdf Instruction Booklet for Washer Electrolux EW 1233I. Electrolux EW 1233I 29 pages.

Print Page

7. Select the required options

The light corresponding to the depressed button

illuminates.

8. Select the Delay Start

To delay starting of the programme, press the

DELAY start button. The figures corresponding to the

selected delay will be displayed for about 3 seconds,

after which the duration of the selected programme

will appear on the display.

During this period it is possible to load other laundry:

• depress START/PAUSE button;

• open the door;

• load the laundry;

• close the door and depress START/PAUSE button

again.

9. Start the programme

To start the selected programme, press the

START/PAUSE button; the corresponding light stops

flashing.

The pilot light corresponding to the wash phase

which is running is on.

The machine starts operating.

If you have chosen a delayed start, the washing

machine will begin the countdown.

The display will show the duration of the programme

or the selected delay.

10. How to change an option or a

programme during its cycle

Before you make any change, you must pause the

machine by pressing the START/PAUSE button

It is possible to change any phase before the

programme carries it out.

Changing a running programme is possible only by

cancelling it and selecting a new programme.

The machine will resume the cycle from the

beginning and the washing water in the tub will not

emptied out.

If it is necessary to drain the water in order to change

the programme in progress, proceed as follows:

• turn the programme selector dial to «O»;

• select programme

• press the START/PAUSE

When the water has been drained, the display shows

a blinking zero and the light

You may now select a new programme and press

the START/PAUSE button

11. Interrupting a programme

Depress the START/PAUSE button to interrupt a

programme which is running: the corresponding light

starts to flash.

Depress the same button to restart the programme.

;

button again.

light on.

to start it.