Electrolux EW 1477 F User Manual - Page 26
Browse online or download pdf User Manual for Washer Electrolux EW 1477 F. Electrolux EW 1477 F 44 pages. Electrolux washing machines
Also for Electrolux EW 1477 F: Instruction Booklet (25 pages)
Print Page
Problem
When a button is pressed
Err
"
" flashes in the multi-
display.
The washing machine
vibrates when operating or
is not stable.
The main wash water is pro-
ducing considerable foam.
Water is running out from
under the washing machine.
Softener is not being rinsed
in, and the æ compartment
for additives is full of water.
The washing has not been
spun as dry as usual.
E20
The
error code is flash-
ing in the multi-display
C
Á (
RINSE) and
(END) indi-
cators are flashing.
The water is not being
drained out.
26
Possible cause
The selected function cannot be
combined with the programme that
has been set.
The height-adjustable feet have not
been set correctly.
The transportation lock has not been
removed.
There is very little washing in the
drum (e.g. only one bathrobe).
Water was not able to be drained
completely before spinning, because
the outlet hose is kinked
or
the drain pump is clogged.
Too much detergent has probably
been used
The threaded inlet hose fitting is leak-
ing.
The outlet hose is leaking.
The drain pump cover is not closed
properly.
Washing is caught in the loading
door.
The emergency emptying hose is not
closed properly or is leaking.
The softener insert has not been cor-
rectly set into the additive compart-
ment or is clogged.
The washing was not able to be dis-
tributed evenly in the drum prior to
spinning.
The outlet hose is kinked.
The maximum pump height (outlet
height 1m from the surface on which
the washing machine has been
.
The
installed) has been exceeded.
The drain pump is clogged.
For siphon connections: The siphon
is blocked.
Remedy
Select another function.
Adjust the feet as described in the instal-
lation and connection instructions.
Remove the transportation lock as
described in the installation and connec-
tion instructions.
Operation is not affected by this.
Check the positioning of the outlet hose
and even out any kinks if necessary or
clean the drain pump and remove any
foreign matter that may be located in the
drain pump housing.
Follow the manufacturer's instructions
when adding detergent.
Screw the inlet hose on tightly.
Check the outlet hose and replace if
necessary.
Close the cover properly.
Cancel the programme and free the
washing from the loading door. Re-start
the programme.
Cap the emergency emptying hose
properly (see section "Carrying out an
emergency emptying procedure"). If the
emergency emptying hose is leaking,
call Customer Service.
Clean the detergent drawer, set the sof-
tener insert firmly in place (see section
"Cleaning and care").
Always load the drum as full as possible
with a combination of large and small
items.
Straighten the hose.
Contact Customer Service, who will be
able to provide an adapter kit for pump
lifts greater than 1m as a special acces-
sory.
Switch off the appliance and disconnect
the power plug, clean the drain pump
(see section "Cleaning the drain pump").
Clean the siphon.