AirStage UTY-RNKY Installation Manual - Page 7
Browse online or download pdf Installation Manual for Controller AirStage UTY-RNKY. AirStage UTY-RNKY 8 pages. Wired remote controller
Also for AirStage UTY-RNKY: Operating Manual (13 pages)
Print Page
Refrigerant circuit address setting
(6) Press the "
" button and select the Remote controller
address (Select the relevant indoor unit).
(7) The Address code "02" blinks when pressing the "
"
" button.
< : Down button
> : Up button
(8) Set the Refrigerant circuit address data by pressing the
"
" button or "
(Range of setting is 00-99.)
(9) Fix the Refrigerant circuit address data by pressing the "
button. (Data is transferred to the indoor unit)
PROHIBITED
•
When Refrigerant circuit address
data is not set in the indoor unit.
(-- is displayed)
•
Set the Refrigerant circuit
address data again as per
procedure (8)-(9) above.
Completion of address setting mode
(10) Address setting mode is released and returns to normal display if the
"
" button, "
button are pressed simultaneously.
* Address setting mode is released automatically if no key is pressed for 60
seconds even the above buttons are not pressed.
(Switch to Address setting mode as per procedure (1) above.)
(11) After completing the ADDRESS SETTING, be sure to turn off the
power and turn it on again.
Remote controller address
Ex. When Remote controller ad-
dress "01" is selected.
" button or
Address code
" button.
Refrigerant circuit address data
Ex. When Refrigerant circuit ad-
dress data "18" is selected.
"
GOOD
When Refrigerant circuit address
data is set in the indoor unit prop-
erly.
(Blinking changes to steady illumi-
nation)
" button and "
"
Normal mode display
10. FUNCTION SETTING
This procedure changes the function settings used to control the indoor unit
according to the installation conditions. Incorrect settings can cause the
indoor unit to malfunction.
Perform the "FUNCTION SETTING" according to the installation conditions
using the remote controller.
•
Refer to the indoor unit installation manual for details on the function
numbers and setting numbers.
•
Prepare for setting of indoor unit referring to installation manual of indoor
unit before start of functional setting.
(1) Press the "
" button, "
"
" button simultaneously for more than 5 seconds to enter the
function setting mode.
(2) Press the "
" button to select the indoor unit number.
Unit number of
INDOOR UNIT
(3) Press the "
" button or "
number.
Function
Number
(4) Press the "
" button or "
select the setting number. The display fl ashes during setting number
selection.
(5) Press the "
" button to confi rm the setting.
Press the "
" button for a few seconds until the setting
number stops fl ashing.
If the setting number display changes or if "- -" is displayed when the
fl ashing stops, the setting number has not been set correctly.
(An invalid setting number may have been selected for the indoor unit.)
PROHIBITED
SU MO TU WE TH FR SA
•
When Setting Number data is
not set in the indoor unit.
(-- is displayed)
•
Set the Setting Number data
again as per procedure (4)-(5)
above.
" button and
SU MO TU WE TH FR SA
SU MO TU WE TH FR SA
" button to select the function
SU MO TU WE TH FR SA
" button to
Setting Value
SU MO TU WE TH FR SA
GOOD
SU MO TU WE TH FR SA
When Setting Number data is set
in the indoor unit properly
(Blinking changes to steady illumi-
nation)
En-6