Carl's Place Pro Enclosure Kit Assembly Instructions & User Manual - Page 2
Browse online or download pdf Assembly Instructions & User Manual for Enclosure Carl's Place Pro Enclosure Kit. Carl's Place Pro Enclosure Kit 20 pages.
Also for Carl's Place Pro Enclosure Kit: Assembly Instructions & User Manual (17 pages), Assembly Instructions & User Manual (20 pages)
Print PageThank you for purchasing a golf simulator impact screen and enclosure kit from
Carl's Place! In this guide you will find everything you need to complete your kit
assembly, plus a few tips to help you make the best use of it.
Literature
•
Assembly Manual & User Guide
•
Frame Assembly Sheet
Frame Components
•
(1) Kit of pipe connector fittings
•
(1) Kit of pre-cut and marked pipes
OR self-sourced, if pipes were not
purchased
Fasteners
•
(1) Bundle of ball bungees
•
Zip ties
Fabric Panels
•
(1) Ceiling panel (or split design)
•
(2) Wall panels (left and right)
•
(1) Impact screen
Assembly Overview
1. Assemble Frame
2. Attach Ceiling Panel
3. Attach Electronics Mount(s)
(if applicable)
4. Attach Baffles (if applicable)
5. Attach Wall Panels
6. Attach Impact Screen
7. Attach Safety Cushions
Page | 2
Materials List
Safety Cushions
•
•
•
Optional Accessories
•
•
Tools Needed
•
•
Scan the QR code to see our full
assembly video.
(1) Large bottom foam cushion
(1) Top foam cushion
(2) Side foam cushions
Projector/Electronics Mount(s)
Ceiling Baffle(s)
6mm Hex Bit Socket and Ratchet
(recommended) or Hex Key
Step Ladder (8-ft recommended)