Carlin EZ-Temp 90000B Instruction Manual

Browse online or download pdf Instruction Manual for Control Systems Carlin EZ-Temp 90000B. Carlin EZ-Temp 90000B 2 pages. E-clamp style with red sensor retainer plug

Carlin EZ-Temp 90000B Instruction Manual
Installer/servicer — Except where specifically stated otherwise,
this manual must be used only by a qualified service technician.
Read and follow all instructions in this manual and in the appliance
manual. Failure to comply with this or other requirements in this
manual could result in severe personal injury, death or substantial
property damage.
This symbol calls out a hazard that could cause severe personal
injury, death or substantial property damage if the instructions
given are not followed.
Wiring: Refer to EZ-Temp data sheet for wiring information.
EZ-Temp
Temperature Controls
Instruction Manual
E-Clamp Style with red sensor retainer plug
Verify ratings: Verify the ratings of the control meet the require-
ments of the appliance as specified in the appliance instructions.
Refer to the EZ-Temp control data sheet for required electrical
supply and load ratings. Verify that the controls, wiring and instal-
lation comply with all applicable codes.
Electrical shock hazard: Disconnect power to appliance when
wiring or servicing any electrical component.
Scald hazard: Water hotter than 130°F can cause serious burns or
death. Follow water heating appliance manufacturer's guidelines
when installing temperature limit controls - DO NOT install a control
that can be set at a higher temperature than specified. Also verify
that the installation includes all water temperature regulating
means needed to ensure the safety of building occupants, in
compliance with all applicable codes.
Verify operation: Test the controls/appliance to verify the appliance
operates as specified in the appliance manual before leaving the
installation.
©
Copyright 2008 — Carlin Combustion Technology, Inc.
Carlin Combustion Technology, Inc.
70 Maple Street
Ph 413-525-7700
T
800-989-2275
ech support
TM
Microprocessor
East Longmeadow, MA 01028
Fx 413-525-8306
carlincombustion.com