Alemlube 20022 Owner's Manual

Browse online or download pdf Owner's Manual for Work Light Alemlube 20022. Alemlube 20022 2 pages. Led cordless workshop light

Print Page
Description
The 20022 Cordless Rechargeable LED Workshop Light has 36 LED elements. The 30 LEDs on the side of the light are for general
ambient lighting and the six LEDs at the top are for torch beam lighting. The life of the LED elements is rated to 100,000 hours. The
light is shatterproof and is supplied inclusive of a 240volt recharger and a 12volt recharger, a docking station and a magnetic centre
piece that enables hands free illumination of an area. The maximum active life of the light as a secondary larger source after full
recharge is approximately 10 hours. A full charge for 6-8 hours must be completed prior to the initial use of the light to ensure correct
operation of your 20022.
Specifications
Uses
Battery
Full Recharge Time
Operating Temperature
Dimensions
Operating Instructions
1
The 20022 Cordless Rechargeable LED Workshop Light is suitable for a multitude
of applications. Ideal as a rechargeable light source in industrial plants,
mechanical workshops, food & beverage facilities, mine sites, camping, marine, or
just at home, the 20022 can be recharged using the 240volt or the 12volt recharger.
2
Connect the appropriate power cord to the docking station, disconnect the battery
from the LED light by depressing the two clips at the bottom of the light and place
the battery into the docking station. The light on the docking station will illuminate
red. Leave the battery in the docking station for a pproximately 8 hours and when
the battery is fully charged, a green light will illuminate on the docking station.
3 Reconnect the battery to the LED workshop light. When the switch is in the middle
position (0), the light will be off. When the left side of the switch is depressed (1),
the 30 LEDs on the side of the light will illuminate. When the switch is depressed to
the right (2), the six LEDs on the top of the light will illuminate.
4 The magnetic tag on the back of the 20022 enables hands free use of the light and
can assist in storage of the 20022 as well.
5 As a secondary light source, the battery will last up to 10 hours before
recharging is required. The recharging process will take about 2.5 hours
to affect. Lightweight at just 1.2 kgs, the 20022 LED Cordless
Rechargeable Workshop Light will assist you to as reducing undertake
repair and service work in poorly lit areas reducing frustration, plant
and machinery downtime and possibly costs relating to parts and
equipment replacement.
6 Storage temperature of the 20022 is between -20ºC and +70ºC and the
lifetime of the LEDs is rated at up to 100,000 hours.
Warnings & Safety Issues
If you do not intend to use the light for an extended period, please fully charge the battery prior to
storing the light.
When using the 20022 for the first time, please charge the battery for 6-8 hours.
Please do not have the light on during the recharging process. Avoid looking directly into the light. Do not use the light near open flames.
General
Thank you for choosing to buy and use the 20022 LED Cordless Rechargeable Workshop Light supplied by
Alemlube. We trust that the 20022 proves to be a reliable, time saving, cost saving and a productivity increasing
tool for you and your company.
NSW
QLD/PNG
TEL: (02) 9939 0711
TEL: (07) 3889 8480
FAX: (02) 9939 0411
FAX: (07) 3889 8490
Visit our website at
OWNER'S MANUAL
LED Cordless Workshop Light
Illumination of work areas in confined spaces or after hours.
7.2V 1800 mA/h – NIMH
2.5 Hours
-5 ºC to +50ºC
335mm long x 55mm in diameter
VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
www.alemlube.com.au
WA
SA/NT
TEL: (08) 9209 3066
TEL: (08) 8241 7111
FAX: (08) 9209 3933
FAX: (08) 8241 7011
20022
NZ
TEL: (09) 447 1007
FAX: (09) 447 1008