Draytek Vigor VigorAccess Quick Start Manual - Page 5
Browse online or download pdf Quick Start Manual for Network Hardware Draytek Vigor VigorAccess. Draytek Vigor VigorAccess 17 pages. Draytek vigor vigoraccess: quick start
Also for Draytek Vigor VigorAccess: Specifications (2 pages)
Print Page
Please turn on the interface that connected to a
slave device. In the above picture, you have to
turn ON the interface G1, G4 and G6 for they
connect to different slave devices. Use the
command on Master below to turn on the
interface.
-
Admin>system link -m gn on
(n means "1" to "6")
-
Admin>system link
(check the status)
How to Check the Connectivity
To check the connectivity between the Master
and Slave Devices, please do the following:
1.
Login through terminal emulator software.
2.
Type the following command
-
Admin>dsl
How to Check the Version Information
To display the basic information of the
controller inside the master device
1.
Login through terminal emulator software.
2.
Type the following command
-
Admin>system basic
Quick Start Guide for VigorAccess
Master Device
Slave Device
The results
You will get the following results:
The results
You will get the following results:
UP-G
Connect to other slave device
3