AirStage AOUA48RLAVM Quick Installation Manual - Page 13

Browse online or download pdf Quick Installation Manual for Heat Pump AirStage AOUA48RLAVM. AirStage AOUA48RLAVM 16 pages. J-ii series

Print Page

Please refer to the applicable indoor unit and Remote Control

Installation Manuals for complete details.

This is a summary of Remote controller wiring:

3 wire remote- Connect Y1, Y2 and Y3 as shown.

2 wire remotes ("T" series IU's only)- Connect only Y1 and Y2 terminals

of the indoor unit to the 2 wire Remote control.

YOU ARE NOW READY TO APPLY POWER TO ALL INDOOR AND

OUTDOOR UNITS.

PLEASE VERIFY REQUIRED VOLTAGE AT THE IU AND OU DISCONNECT

BEFORE APPLYING POWER.

ALL AIRSTAGE IU'S REQUIRE 208/230 SINGLE PHASE POWER.

AFTER PRESSING "ENTER" FOR MORE THAN (3)

SECONDS, PROCEED TO QIG STEP 21b.

AFTER POWERING THE EQUIPMENT AND BEFORE THE SYSTEM IS OPERATED,

AN "INDOOR UNIT CONNECTION CHECK" MUST BE PERFORMED!

THIS CHECK IS PERFORMED AT THE OUTDOOR UNIT.

21a

Continued from Step 21a.

Refer to the Installation Manual for complete installation details.

21b