Drayton 22092 Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Thermostat Drayton 22092. Drayton 22092 2 pages. Programmable room thermostat 5-2 day / 7 day
Also for Drayton 22092: User Instructions (2 pages), Installation Instructions (2 pages), User Manual (14 pages)

Print Page
Drayton 22092 Quick Start Manual
Programming the Digistat +3/+3RF
Your Digistat +3/+3RF comes with the following settings pre-programmed for your
convenience:
Pre-set program 1 (9 til 5) WEEKDAY
Event
1
2
Time
6:30
8:30
Temperature
20.0
16.0
As you can see, at 06:30, the heating will
come
on to raise the temperature to
20ºC. At 8.30, the temperature set point is
dropped from 20ºC down to 16ºC, at which
time it stays at 16ºC throughout the day,
until 16:30 when the temperature increases
to 21ºC. The temperature then drops down
to a night-setback temperature of 7ºC until
06:30 when the cycle repeats for the next
day (Monday to Friday) or changes to
weekend settings see below.
Pre-set program 1 (9 til 5) WEEKEND
Event
1
2
Time
7:00
9:00
Temperature
20.0
18.0
As you can see, at 07:00, the heating will
come on to raise the temperature to 20ºC. At
9.00, the temperature set point is dropped
from 20ºC down to 18ºC, it stays at 18ºC until
12.00 when the heating comes to raise the
temperature to 21ºC. The temperature stays
at 21ºC until 14.00 when it drops down to
18ºC. at 16.30 the heating comes on to raise
the temperature to 21ºC where it stays until
23.00 when the temperature then drops
down to a night-setback temperature of 7ºC
until 07.00 when the cycle repeats for the
next day (Saturday and Sunday) or changes
to weekday settings see above.
3
4
5
12:00
14:00
16:30
16.0
16.0
21.0
*The above settings can be understood using the chart below:
25ºC
20ºC
15ºC
10ºC
5ºC
1
2
3
4
5
06:30
08:30
12:00
14:00
16:30
Time Period Monday - Friday
3
4
5
12:00
14:00
16:00
21.0
18.0
21.0
*The above settings can be understood using the chart below:
25ºC
20ºC
15ºC
10ºC
5ºC
1
2
3
4
5
07:00
09:00
12:00
14:00
16:00
Time Period Saturday-Sunday
TO ADJUST THE TIMES AND TEMPERATURES FOR 5-2 DAY OPERATION:
1. With the product operating as normal
in the Auto mode press
then press the
6
display is flashing and shows:
22:30
7.0
2. Press the
display will be as shown. The time will
be flashing, use the
to adjust the 1st time as required.
3. Once time has been set, press
6
and use the
required temperature (shown flashing).
22:30
Press
the next time and temperature periods
to be adjusted confirming changes by
pressing
6
23:00
4. Once the last weekday temperature
7.0
period has been set, press
to confirm settings and allow
adjustment of the weekend program.
Use the
button to set the 6 periods for
the weekend program.
5. Once the final temperature has been
set press
exit press
return to auto mode with the bottom
6
arrow pointing at Auto.
23:00
The unit is now set correctly to follow your required timings.
once and
button until the
button once, the
or
button
or
button to adjust
to confirm and move to
(* small 1 in lower half of screen shows which
(max. 6 periods).
time period is being set e.g. 1=1st period,
once
and
buttons and the
to confirm setting. To
or
until you
Congratulations!
2 = 2nd period etc)