Carlisle Binks 107760 Service Manual - Page 9

Browse online or download pdf Service Manual for Controller Carlisle Binks 107760. Carlisle Binks 107760 17 pages. Back pressure regulator

Print Page

Following pressure testing and flushing procedures the diaphragms should be examined

and replaced if necessary to ensure the integrity of the unit prior to use in production.

Turning the main adjusting screw clockwise will increase the spring pressure on the unit

and therefore the fluid back pressure on the paint system.

Turning the screw anti-clockwise will decrease back pressure.

The Pilot controlled unit operates in the same way, an increase in pilot air pressure

increases the system back pressure.

5 Adjust the spring (or pilot air pressure) until the desired system fluid back pressure is

achieved on the pressure gauge in the BPR inlet pipework.

77-3247 R2.2

Installation

9/16