Alemlube EL SERIES Owner Technical Manual - Page 5

Browse online or download pdf Owner Technical Manual for Lubrication systems Alemlube EL SERIES. Alemlube EL SERIES 11 pages. Oil pump
Also for Alemlube EL SERIES: Service Instructions (3 pages), Owner Technical Manual (4 pages), Owner Technical Manual (6 pages), Service Instructions (2 pages), Service Instructions (2 pages), Owner Technical Manual (4 pages), Owner Technical Manual (2 pages), Owner Technical Manual (4 pages), Owner Technical Manual (5 pages), Owner's Manual (4 pages), Instruction Manual (17 pages)

Print Page

Alemlube EL SERIES Owner Technical Manual

Connection of the Grease Discharge

1. The Grease discharge outlet is a 1/4" thread. Connect the outlet to the high pressure hose

(according to DIN-SAE norms) through the corresponding adapter and terminal.

2. Ensure the nozzle or corresponding valve is closed.

3. Slowly open the pump's compressed air inlet valve. The pump will start to function, filling the feed circuit

with grease. Maintain pressure on the nozzle until the grease starts to come out.

The pump is now ready for its usual function.

Pump Operation

If the pump has already been primed and the compressed air feed is connected to the appropriate work pressure

level (5-10 bar,) the pump will start automatically when the nozzle or nozzle situated at the end of the grease delivery

circuit is opened. To stop the pump, simply close the nozzle or disconnect the air inlet line.

Connect the Pump with other Accessories

Part No.

Description

Grease Pump

Drum Cover

Grease Control Valve

Hose with Fitting

Air Hose with Quick Coupling

Drum

7 (7-1, 7-2, 7-3)

Filter, Pressure Regulator and Lubricator

Follower Plate

Manual of Grease Pump Distribution Kits

Pressure Relief Procedure

To reduce the risk of serious body injury, including fluid injection, splashing in the eyes or on the skin, or injury

from moving parts, please always follow this procedure whenever you shut off the pump, when checking

or servicing any part of the spray/dispensing system, when installing, cleaning or changing spray tips/nozzles,

and whenever you stop spraying/dispensing.

1. Shut off the air to the pump.

2. Point the outlet of grease control valve to container and trigger the grease control valve to relieve pressure.

NSW/ACT

QLD/PNG

TEL: (02) 9939 0711

TEL: (07) 3889 8480

FAX: (02) 9939 0411

FAX: (07) 3889 8490

OWNER'S TECHNICAL MANUAL

20KG Grease Kit

VIC/TAS

TEL: (03) 8787 8288

FAX: (03) 8787 8266

Visit our website at

www.alemlube.com.au

SA/NT

TEL: (08) 9209 3066

TEL: (08) 8241 7111

FAX: (08) 9209 3933

FAX: (08) 8241 7011

www.alemlube.co.nz

G100120

TEL: (09) 447 1007

FAX: (09) 447 1008