Dražice OKC 160/1m2 Operation And Installation Manual - Page 2

Browse online or download pdf Operation And Installation Manual for Water Heater Dražice OKC 160/1m2. Dražice OKC 160/1m2 12 pages. Tank-type water heaters for vertical mounting

Print Page
Dražice OKC 160/1m2 Operation And Installation Manual
Read carefully the below instructions prior to the installation of the
heater!
Dear Customer,
The Works Cooperative of Dražice - Machine Plant, Ltd., would like to thank you for your decision to use a
product of our brand.
The manufacturer reserves the right for engineering modification of the product.
The product is designed for permanent contact with drinkable water.
Guide Contents
1.
FUNCTION DESCRIPTION ............................................................................................................... 2
2.
MESSAGE FOR CUSTOMERS .......................................................................................................... 3
3.
TECHNICAL DESCRIPTION ............................................................................................................. 3
4.
OPERATING ACTIVITY .................................................................................................................... 3
5.
SERVICING ......................................................................................................................................... 4
6.
WALL MOUNTING ............................................................................................................................ 5
7.
PLUMBING FIXTURE........................................................................................................................ 5
8.
9.
ELECTRIC INSTALLATION ............................................................................................................. 6
10. PUTTING THE HEATER INTO OPERATION ................................................................................. 6
11. HEATER CLEANING AND ANODE ROD EXCHANGE ................................................................ 6
12. IMPORTANT NOTICES ..................................................................................................................... 6
14. INSTALLATION REGULATIONS .................................................................................................... 7
15. MOST FREQUENT FUNCTION FAILURES AND THEIR CAUSES ............................................. 8
16. PRODUCT ACCESSORIES ................................................................................................................ 8
TECHNICAL DATA CHART.............................................................................................................9
17.
.......................................................................................................................................................10
Environment Type:
It is recommended to use the product in indoor environment with air temperatures from +2°C to 45°C and a
relative humidity up to 80%.
1.

FUNCTION DESCRIPTION

The heater is designed for accumulation heating of service water using electricity or thermal energy via an
exchanger (for the combined design only).
Water is heated by an electric element (or a heat exchanger) in an enamelled thermally insulated accumulator at
the time defined by the power supplier. The element is at the time of heating controlled by a thermostat the
temperature of which can be adjusted continuously (within the range between 5°C and 74°C). Once the selected
temperature is reached, heating interrupts automatically.
consumption. The tank keeps constant pressure of water from the water main. If the combination faucet hot water
valve is opened, water from the water supply conduit pressed out by cold water pressure flows out of the heater.
Hot water flows out through the top part, and water flowing in remains in the bottom part of the heater. Pressure
principle allows hot water withdrawal at any place from the heater (Fig. 1).
Water accumulated in the tank is then used for
2